NBR Class M 4-4-0

NBR Class M
LNER Class D31
Type and origin
Power type Steam
Designer Matthew Holmes
Builder North British Railway (Cowlairs)
Build date 1884-1899
Rebuilt 1918-1922
Total produced 48
(60 including D27 & D28 types)
Specifications
Configuration 4-4-0
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Leading dia. 3 ft 6 in (1.07 m)
Coupled dia. 6 ft 6 in (1.98 m)
Length 22 ft 1 in (6.73 m) (engine only)
43 ft 4 in (13.21 m) (engine & tender)
Loco weight 46.4 long tons (47.1 t)
Fuel type coal
Firebox:
 • Firegrate area		 19.47 square feet
Boiler pressure 175 psi (1.21 MPa)
Cylinders two inside
Cylinder size 18 1⁄4 in × 26 in (460 mm × 660 mm)
Performance figures
Tractive effort 16,514 lbf (73.46 kN)
Career
Power class BR: 2P
Withdrawn 1933-1952
Disposition All scrapped
NBR Class M
LNER Class D27 & D28
Type and origin
Power type Steam
Designer Dugald Drummond
Builder Neilson & Co (2 batches)
North British Railway (1 batch)
Build date 1877-1879
Rebuilt 1902-1904
Total produced 12
(60 including D31 type)
Specifications
Configuration 4-4-0
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Leading dia. 3 ft 6 in (1.07 m)
Coupled dia. 6 ft 6 in (1.98 m)
Length 22 ft 1 in (6.73 m) (engine only)
42 ft 9 in (13.03 m) (engine & tender)
Loco weight 46.6 long tons (47.3 t)
Fuel type coal
Firebox:
 • Firegrate area		 20 square feet
Boiler pressure 175 psi (1.21 MPa)
Cylinders two inside
Cylinder size 18 1⁄4 in × 26 in (460 mm × 660 mm)
Performance figures
Tractive effort 16,514 lbf (73.46 kN)
Career
Nicknames Abbotsford
Withdrawn 1921-1926
Disposition All scrapped

The NBR Class M (later LNER Class D31) was a class of 4-4-0 steam locomotive of the North British Railway. The class was created during the tenures of William P. Reid (Locomotive Superintendent) and Walter Chalmers (Chief Draughtsman) by rebuilding three earlier types, the "574", "633", and "729",[1] which had all been designed by Matthew Holmes, and shared many features in common. A total of 48 were produced.

The NBR Class M (later LNER Class D27 & D28) was an older but very similar type of 4-4-0 locomotive, commonly known as the Abbotsford class, and a pioneering 4-4-0 design by Dugald Drummond. A total of 12 were produced. The engines were rebuilt (6 in 1902 and 6 in 1904) to become almost exact copied of the D31 engines. The only visible differences between the 1902 (D27) and 1904 (D28) designs were slight differences to the cab doors and windows.

History

Although both the Holmes and the Drummond engines were included in the class M designation when the NBR adopted formal class designations in 1913, the LNER did not consider the locomotives to be of the same class, and in 1923 (on grouping) the Holmes M class became LNER class D31, whilst the two types of Abbotsfords became LNER classes D27 and D28.

The D31 type locomotives all passed to the London and North Eastern Railway in 1923 but one was withdrawn in 1931, and general withdrawals began in 1933, with only seven of the class passing to British Railways in 1948.

The D27 & D28 type locomotives were withdrawn earlier. Five were scrapped pre-grouping, although the other seven passed to the London and North Eastern Railway in 1923. All were withdrawn by 1926, with none passing to British Railways at nationalisation.

The common nickname "Abbotsfords" for the D27 and D28 locomotives is derived from the name of engine 479 (the fourth built). This engine was used in publicity photographs at the Cowlairs works when the locomotives were built, and these publicity photographs are believed to be the origins of the nickname.

Build dates

Class M (D31)

The 574 series engines were constructed in 1884, with a total of 6 built. The 633 series engines numbered 24 locomotives in total, built from 1890 to 1895. The initial batch of 729 series engines was constructed in 1898, with 12 built; this was followed by a second batch of 6 engines the following year.[1] All three types were reconstructed under Locomotive Supintendant William Reid, to form the Class M, with a total of 48 engines.

Class M (D27 and D28)

The NBRs earlier Abbotsford 4-4-0 locomotives (built 1877-1879) had been the railway's initial experiment with powerful express 4-4-0 engines, designed by Dugald Drummond. When these 12 engines were rebuilt, 6 in 1902 and 6 in 1904, they were left almost identical to the class M engines, and the NBR included them in the "Class M" designation, giving a total of 60 engines in the class. However, upon grouping in 1923 the LNER designated the 48 "true" Class M engines as class D31, but gave the rebuilt Abbotsford engines different designations - class D27 for the 1902 batch, and class D28 for the 1904 batch.[2]

Preservation

The last D31 was withdrawn in December 1952 and none was preserved. The Abbotsford locomotives had been withdrawn earlier (the last D27 in 1924, the last D28 in 1926), and none was preserved.[2]

Sources

External links

References

  1. 1 2 "The Holmes D31 (NBR Class M) 4-4-0 Locomotives". The London & North Eastern Railway Encyclopedia. Retrieved 2016-02-02.
  2. 1 2 "The Drummond D27 & D28 (NBR Class M) 'Abbotsford' 4-4-0 Locomotives". The London & North Eastern Railway Encyclopedia. Retrieved 2016-02-02.
This article is issued from Wikipedia - version of the 3/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.