Tight gas

An illustration of tight gas compared to other types of gas deposits.

Tight gas is natural gas produced from reservoir rocks with such low permeability that massive hydraulic fracturing is necessary to produce the well at economic rates. Tight gas reservoirs are generally defined as having less than 0.1 millidarcy (mD) matrix permeability and less than ten percent matrix porosity.[1][2] Although shales have low permeability and low effective porosity, shale gas is usually considered separate from tight gas, which is contained most commonly in sandstone, but sometimes in limestone. Tight gas is considered an unconventional source of natural gas.

Rock with permeabilities as little as one nanodarcy, reservoir stimulation may be economically productive with optimized spacing and completion of staged fractures to maximize yield with respect to cost.[3]

Examples

Some examples of tight gas reservoirs are:

See also

References

  1. ↑ Ben E. Law and Charles W. Spencer, 1993, "Gas in tight reservoirs-an emerging major source of energy," in David G. Howell (ed.), The Future of Energy Gasses, US Geological Survey, Professional Paper 1570, p.233-252.
  2. ↑ Ali Sharif, Tight gas resources in Western Australia, Western Australia Department of Mines and Petroleum, Sept. 2007.
  3. ↑ McCoy, Mark; W. Neal Sams (2007). "Tight Gas Reservoir Simulation: Modeling Discrete Irregular Strata-Bound Fracture Networks and Network Flow, Including Dynamic Recharge from the Matrix" (PDF). National Energy Technology Laboratory. Retrieved 27 October 2011.
  4. ↑ Alan Petzet, "Wintershall starts Dutch North Sea tight gas flow," Oil and Gas Journal, 6 Mar. 2012.
This article is issued from Wikipedia - version of the 9/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.