Two-point tensor

"Double vector" redirects here. For dual vectors, see dual space. For bivectors, see bivector.

Two-point tensors, or double vectors, are tensor-like quantities which transform as vectors with respect to each of their indices and are used in continuum mechanics to transform between reference ("material") and present ("configuration") coordinates.^[1] Examples include the deformation gradient and the first Piola–Kirchhoff stress tensor.

As with many applications of tensors, Einstein summation notation is frequently used. To clarify this notation, capital indices are often used to indicate reference coordinates and lowercase for present coordinates. Thus, a two-point tensor will have one capital and one lower-case index; for example, A_jM.

Continuum mechanics

A conventional tensor can be viewed as a transformation of vectors in one coordinate system to other vectors in the same coordinate system. In contrast, a two-point tensor transforms vectors from one coordinate system to another. That is, a conventional tensor,

{\mathbf {Q}}=Q_{{pq}}({\mathbf {e}}_{p}\otimes {\mathbf {e}}_{q})

actively transforms a vector u to a vector v such that

{\mathbf {v}}={\mathbf {Q}}{\mathbf {u}}

where v and u are measured in the same space and their coordinates representation is with respect to the same basis (denoted by the "e").

In contrast, a two-point tensor, G will be written as

{\mathbf {G}}=G_{{pq}}({\mathbf {e}}_{p}\otimes {\mathbf {E}}_{q})

and will transform a vector, U, in E system to a vector, v, in the e system as

{\mathbf {v}}={\mathbf {GU}}

The transformation law for two-point tensor

Suppose we have two coordinate systems one primed and another unprimed and a vectors' components transform between them as

v'_{p}=Q_{{pq}}v_{q}

For tensors suppose we then have

T_{{pq}}(e_{p}\otimes e_{q})

A tensor in the system $e_{i}$ . In another system, let the same tensor be given by

T'_{{pq}}(e'_{p}\otimes e'_{q})

We can say

T'_{{ij}}=Q_{{ip}}Q_{{jr}}T_{{pr}}

Then

T'=QTQ^{T}

is the routine tensor transformation. But a two-point tensor between these systems is just

F_{{pq}}(e'_{p}\otimes e_{q})

which transforms as

F'=QF

The most mundane example of a two-point tensor

The most mundane example of a two-point tensor is the transformation tensor, the Q in the above discussion. Note that

v'_{p}=Q_{{pq}}u_{q}

Now, writing out in full,

u=u_{q}e_{q}

and also

v=v'_{p}e_{p}

This then requires Q to be of the form

Q_{{pq}}(e'_{p}\otimes e_{q})

By definition of tensor product,

(e'_{p}\otimes e_{q})e_{q}=(e_{q}.e_{q})e'_{p}=e'_{p}\qquad (1)

So we can write

u_{p}e_{p}=(Q_{{pq}}(e'_{p}\otimes e_{q}))(v_{q}e_{q})

Thus

u_{p}e_{p}=Q_{{pq}}v_{q}(e'_{p}\otimes e_{q})e_{q}

Incorporating (1), we have

u_{p}e_{p}=Q_{{pq}}v_{q}e_{p}

External links

References

↑ Humphrey, Jay D. Cardiovascular solid mechanics: cells, tissues, and organs. Springer Verlag, 2002.

This article is issued from Wikipedia - version of the 10/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.