Soil structure

Soil structure describes the arrangement of the solid parts of the soil and of the pore space located between them. It is determined by how individual soil granules clump, bind together, and aggregate, resulting in the arrangement of soil pores between them. Soil structure has a major influence on water and air movement, biological activity, root growth and seedling emergence.

Overview

Soil structure describes the arrangement of the solid parts of the soil and of the pore spaces located between them (Marshall & Holmes, 1979). The structure depends on what the soil developed from. The quality of soil structure will decline under most forms of cultivation—the associated mechanical mixing of the soil compacts and shears aggregates and fills pore spaces; it also exposes organic matter to a greater rate of decay and oxidation (Young & Young, 2001). A further consequence of continued cultivation and traffic is the development of compacted, impermeable layers or pans within the profile.

The decline of soil structure under irrigation is usually related to the breakdown of aggregates and dispersion of clay material as a result of rapid wetting. This is particularly so if soils are sodic; that is, having a high exchangeable sodium percentage (ESP) of the cations attached to the clays. High sodium levels (compared to high calcium levels) cause particles to repel one another when wet, and the associated aggregates to disaggregate and disperse. The ESP will increase if irrigation causes salty water (even of low concentration) to gain access to the soil.

A wide range of practices are undertaken to preserve and improve soil structure. For example, the NSW Department of Land and Water Conservation, (1991) advocates: increasing organic content by incorporating pasture phases into cropping rotations; reducing or eliminating tillage and cultivation in cropping and pasture activities; avoiding soil disturbance during periods of excessive dry or wet when soils may accordingly tend to shatter or smear; and ensuring sufficient ground cover to protect the soil from raindrop impact. In irrigated agriculture, it may be recommended to: apply gypsum (calcium sulfate) to displace sodium cations with calcium and so reduce ESP or sodicity, avoid rapid wetting, and avoid disturbing soils when too wet or dry.

Impacts of improving soil structure

The benefits of improving soil structure for the growth of plants, particularly in an agricultural setting include: reduced erosion due to greater soil aggregate strength and decreased overland flow; improved root penetration and access to soil moisture and nutrients; improved emergence of seedlings due to reduced crusting of the surface; and greater water infiltration, retention and availability due to improved porosity.

It has been estimated that productivity from irrigated perennial horticulture could be increased by two to three times the present level by improving soil structure, because of the resulting access by plants to available soil water and nutrients (Cockroft & Olsson, 2000, cited in Land and Water Australia 2007). The NSW Department of Land and Water Conservation (1991) suggests that in cropping systems, wheat yields can be increased by 10 kg/ha for every extra millimetre of rain that is able to infiltrate due to soil structure improvements.

Hardsetting soil

Hardsetting soils lose their structure when wet and then set hard as they dry out to form a structureless mass that is very difficult to cultivate. They can only be tilled when their moisture content is within a limited range. When they are tilled the result is often a very cloddy surface (poor tilth). As they dry out the high soil strength often restricts seedling and root growth. Infiltration rates are low and runoff of rain and irrigation limits the productivity of many hardsetting soils.<ref name="Daniells2012">Daniells, Ian G. (2012). "Hardsetting soils: a review". Soil Research. 50 (5): 349–359. doi:10.1071/SR11102. </ref>

Definition

Hardsetting has been defined this way: "A hardsetting soil is one that sets to an almost homogeneous mass on drying. It may have occasional cracks, typically at a spacing of >0.1 m. Air dry hardset soil is hard and brittle, and it is not possible to push a forefinger into the profile face. Typically, it has a tensile strength of 90 kN m<sup>–2</sup>. Soils that crust are not necessarily hardsetting since a hardsetting horizon is thicker than a crust. (In cultivated soils the thickness of the hardsetting horizon is frequently equal to or greater than that of the cultivated layer.) Hardsetting soil is not permanently cemented and is soft when wet. The clods in a hardsetting horizon that has been cultivated will partially or totally disintegrate upon wetting. If the soil has been sufficiently wetted, it will revert to its hardset state on drying. This can happen after flood irrigation or a single intense rainfall event."<ref name="Mullins1997">Mullins, CE (1997). "Hardsetting". In R Lal; WH Blum; C Valentin; BA Stewart. Methods for assessment of soil degradation. Boca Raton, FL: CRC Press. p. 121. ISBN 9780849374432. Retrieved 18 August 2016. </ref>

See also

References

 This article incorporates public domain material from the United States Government document "http://www.nrcs.usda.gov/wps/portal/nrcs/detail/soils/ref/?cid=nrcs142p2_054253".

    External links


    Types of soil structure

    Prismatic, Platy, Columnar, Blocky and Spheroidal.

    This article is issued from Wikipedia - version of the 12/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.