Sodium azide

Not to be confused with sodium nitride.
Sodium azide
Names
Other names
Sodium trinitride
Smite
Azium
Identifiers
26628-22-8 YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:278547 YesY
ChEMBL ChEMBL89295 YesY
ChemSpider 30958 YesY
ECHA InfoCard 100.043.487
EC Number 247-852-1
PubChem 33557
RTECS number VY8050000
UN number 1687
Properties
NaN3
Molar mass 65.0099 g/mol
Appearance colorless to white solid
Odor odorless
Density 1.846 g/cm3 (20 °C)
Melting point 275 °C (527 °F; 548 K) violent decomposition
38.9 g/100 mL (0 °C)
40.8 g/100 mL (20 °C)
55.3 g/100 mL (100 °C)
Solubility very soluble in ammonia
slightly soluble in benzene
insoluble in ether, acetone, hexane, chloroform
Solubility in methanol 2.48 g/100 mL (25 °C)
Solubility in ethanol 0.22 g/100 mL (0 °C)
Acidity (pKa) 4.8
Structure
Hexagonal, hR12[1]
R-3m, No. 166
Thermochemistry
76.6 J/mol K
70.5 J/mol K
21.3 kJ/mol
99.4 kJ/mol
Hazards
Safety data sheet External MSDS
Highly toxic (T+)
Very dangerous for the environment (N)
R-phrases R28, R32, R50/53
S-phrases (S1/2), S28, S45, S60, S61
NFPA 704
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g., canola oil Health code 4: Very short exposure could cause death or major residual injury. E.g., VX gas Reactivity code 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g., fluorine Special hazards (white): no codeNFPA 704 four-colored diamond
1
4
3
Flash point 300 °C (572 °F; 573 K)
Lethal dose or concentration (LD, LC):
27 mg/kg (oral, rats/mice)[1]
US health exposure limits (NIOSH):
PEL (Permissible)
 none[2]
REL (Recommended)
 C 0.1 ppm (as HN3) [skin] C 0.3 mg/m3 (as NaN3) [skin][2]
IDLH (Immediate danger)
 N.D.[2]
Related compounds
Other anions
 Sodium cyanide
Other cations
 Potassium azide
Ammonium azide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Sodium azide is the inorganic compound with the formula NaN3. This colorless salt is the gas-forming component in many car airbag systems. It is used for the preparation of other azide compounds. It is an ionic substance, is highly soluble in water, and is very acutely toxic.

Structure

Sodium azide is an ionic solid. Two crystalline forms are known, rhombohedral and hexagonal.[1][3] Both adopt layered structures. The azide anion is very similar in each form, being centrosymmetric with N–N distances of 1.18 Å. The Na+
 ion has octahedral geometry. Each azide is linked to six Na+ centers, with three Na-N bonds to each terminal nitrogen center.[4]

Preparation

The common synthesis method is the "Wislicenus process," which proceeds in two steps from ammonia. In the first step, ammonia is converted to sodium amide:

2 Na + 2 NH3 → 2 NaNH2 + H2

The sodium amide is subsequently combined with nitrous oxide:

2 NaNH2 + N2O → NaN3 + NaOH + NH3

These reactions are the basis of the industrial route, which produced about 250 tons/y in 2004, with production increasing owing to the popularization of airbags.[5]

Laboratory methods

Curtius and Thiele developed another production process where a nitrite ester is converted to sodium azide using hydrazine. This method is suited for laboratory preparation of sodium azide:

2 NaNO2 + 2 C2H5OH +H2SO4 → 2 C2H5ONO + Na2SO4 + 2 H2O
C2H5ONO + N2H4-H2O + NaOH → NaN3 + C2H5OH + 3 H2O

Alternatively the salt can be obtained by the reaction of sodium nitrate with sodium amide.[6]

Chemical reactions

Treatment of sodium azide with strong acids gives hydrazoic acid, which is also extremely toxic:

H+
 + N−
3 → HN
3

Aqueous solutions contain minute amounts of hydrogen azide, the formation of which is described by the following equilibrium:

N−
3 + H
2O ⇌ HN
3 + OH−
 (K = 10−4.6
)

Sodium azide can be destroyed by treatment with nitrous acid solution:[7]

2 NaN3 + 2 HNO2 → 3 N2 + 2 NO + 2 NaOH

Applications

Automobile airbags and airplane escape chutes

Older airbag formulations contained mixtures of oxidizers and sodium azide and other agents including ignitors and accelerants. An electronic controller detonates this mixture during an automobile crash:

2 NaN3 → 2Na + 3 N2

The same reaction occurs upon heating the salt to approximately 300 °C. The sodium that is formed is a potential hazard alone and, in automobile airbags, it is converted by reaction with other ingredients, such as potassium nitrate and silica. In the latter case, innocuous sodium silicates are generated.[8] Sodium azide is also used in airplane escape chutes. Newer generation air bags contain nitroguanidine or similar less sensitive explosives.

Organic and inorganic synthesis

Due to its explosion hazard, sodium azide is of only limited value in industrial scale organic chemistry. In the laboratory, it is used in organic synthesis to introduce the azide functional group by displacement of halides. The azide functional group can thereafter be converted to an amine by reduction with either SnCl2 in ethanol or lithium aluminium hydride or a tertiary phosphine, such as triphenylphosphine in the Staudinger reaction, with Raney nickel or with hydrogen sulfide in pyridine.

Sodium azide is a versatile precursor to other inorganic azide compounds, e.g., lead azide and silver azide, which are used in explosives.

Biochemistry and biomedical uses

Sodium azide is a useful probe reagent and a preservative.

In hospitals and laboratories, it is a biocide; it is especially important in bulk reagents and stock solutions which may otherwise support bacterial growth where the sodium azide acts as a bacteriostatic by inhibiting cytochrome oxidase in gram-negative bacteria; gram-positive (streptococci, pneumococci, lactobacilli) are intrinsically resistant.[9]

Agricultural uses

It is used in agriculture for pest control of soil-borne pathogens such as Meloidogyne incognita or Helicotylenchus dihystera.[10]

It is also used as a mutagen for crop selection of plants such as rice,[11] barley[12] or oats.[13]

Safety considerations

Sodium azide has caused deaths for decades.[14] It is a severe poison. It may be fatal in contact with skin or if swallowed.[15] Even minute amounts can cause symptoms. The toxicity of this compound is comparable to that of soluble alkali cyanides and the lethal dose for an adult human is about 0.7 grams.[16] No toxicity has been reported from spent airbags.[17]

Azide inhibits cytochrome oxidase by binding irreversibly to the heme cofactor in a process similar to the action of carbon monoxide. Sodium azide particularly affects organs that undergo high rates of respiration, such as the heart and the brain.

It produces extrapyramidal symptoms with necrosis of the cerebral cortex, cerebellum, and basal ganglia. Toxicity may also include hypotension,[18] blindness and hepatic necrosis. Sodium azide increases cyclic GMP levels in brain and liver by activation of guanylate cyclase.[19]

References

  1. 1 2 3 Stevens E. D.; Hope H. (1977). "A Study of the Electron-Density Distribution in Sodium Azide, NaN
    3    ". Acta Crystallographica A. 33 (5): 723–729. doi:10.1107/S0567739477001855.
  2. 1 2 3 "NIOSH Pocket Guide to Chemical Hazards #0560". National Institute for Occupational Safety and Health (NIOSH).
  3. ↑ Wells, A. F. (1984), Structural Inorganic Chemistry (5th ed.), Oxford: Clarendon Press, ISBN 0-19-855370-6
  4. ↑ Pringle, G. E.; Noakes, D. E. (1968-02-15). "The crystal structures of lithium, sodium and strontium azides". Acta Crystallographica Section B. 24 (2): 262–269. doi:10.1107/s0567740868002062.
  5. ↑ Jobelius, Horst H.; Scharff, Hans-Dieter (2000-01-01). Hydrazoic Acid and Azides. Wiley-VCH Verlag GmbH & Co. KGaA. doi:10.1002/14356007.a13_193. ISBN 9783527306732.
  6. ↑ Holleman, A. F.; Wiberg, E. (2001), Inorganic Chemistry, San Diego: Academic Press, ISBN 0-12-352651-5
  7. ↑ Committee on Prudent Practices for Handling, Storage, and Disposal of Chemicals in Laboratories, Board on Chemical Sciences and Technology, Commission on Physical Sciences, Mathematics, and Applications, National Research Council (1995). "Disposal of Waste". Prudent Practices in the Laboratory: Handling and Disposal of Chemicals. Washington, DC: National Academy Press. p. 165. ISBN 0-309-05229-7.
  8. ↑ Betterton, E. A. (2003). "Environmental Fate of Sodium Azide Derived from Automobile Airbags". Critical Reviews in Environmental Science and Technology. 33 (4): 423–458. doi:10.1080/10643380390245002.
  9. ↑ Lichstein, H. C.; Soule, M. H. (1943). "Studies of the Effect of Sodium Azide on Microbic Growth and Respiration: I. The Action of Sodium Azide on Microbic Growth". Journal of Bacteriology. 47 (3): 221–230. PMC 373901Freely accessible. PMID 16560767.
  10. ↑ Applications of sodium azide for control of soilborne pathogens in potatoes. Rodriguez-Kabana, R., Backman, P. A. and King, P.S., Plant Disease Reporter, 1975, Vol. 59, No. 6, pp. 528-532 (link)
  11. ↑ Awan, M. Afsar; Konzak, C. F.; Rutger, J. N.; Nilan, R. A. (2000-01-01). "Mutagenic Effects of Sodium Azide in Rice1". Crop Science. 20 (5): 663–668. doi:10.2135/cropsci1980.0011183x002000050030x.
  12. ↑ Cheng, Xiongying; Gao, Mingwei. "Biological and genetic effects of combined treatments of sodium azide, gamma rays and EMS in barley". Environmental and Experimental Botany. 28 (4): 281–288. doi:10.1016/0098-8472(88)90051-2.
  13. ↑ Rines, H. W. (1985-02-01). "Sodium azide mutagenesis in diploid and hexaploid oats and comparison with ethyl methanesulfonate treatments". Environmental and Experimental Botany. 25 (1): 7–16. doi:10.1016/0098-8472(85)90043-7.
  14. ↑ Chang, Soju; Lamm, Steven H. (2003-05-01). "Human Health Effects of Sodium Azide Exposure: A Literature Review and Analysis". International Journal of Toxicology. 22 (3): 175–186. doi:10.1080/10915810305109. ISSN 1091-5818. PMID 12851150.
  15. ↑ Richardson, S. G.; Giles, C.; Swan, C. H. (1975-05-01). "Two cases of sodium azide poisoning by accidental ingestion of Isoton.". Journal of Clinical Pathology. 28 (5): 350–351. doi:10.1136/jcp.28.5.350. ISSN 1472-4146. PMID 1150884.
  16. ↑ "MSDS: sodium azide". Mallinckrodt Baker. 2008-11-21. MSDS S2906.
  17. ↑ Olson, Kent; Anderson, Ilene B. (18 September 2006). Poisoning & Drug Overdose, 5th Edition. McGraw-Hill Companies,Incorporated. pp. 123–. ISBN 978-0-07-144333-3.
  18. ↑ "Kidney International - Abstract of article: Epidemic hypotension in a dialysis center caused by sodium azide". Kidney Int. 37 (1): 110–115. 1990-01-01. doi:10.1038/ki.1990.15. ISSN 0085-2538.
  19. ↑ Kimura, Hiroshi; Mittal, Chandra K.; Murad, Ferid (1975-10-23). "Increases in cyclic GMP levels in brain and liver with sodium azide an activator of guanylate cyclase". Nature. 257 (5528): 700–702. doi:10.1038/257700a0.
This article is issued from Wikipedia - version of the 10/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.