Schecter Guitar Research

Schecter Guitar Research
Private Company Guitar manufacturer
Industry Musical instruments
Founded Van Nuys, California, United States (1976 (1976))
Founder David Schecter, Herschel Blankenship and Shel Horlick
Headquarters 1840 Valpreda Street
Burbank, California 91504
United States
Area served
Worldwide
Key people
David Schecter
Herschel Blankenship
Shel Horlick (founders)
Hisatake Shibuya (distributor/owner)
Michael Ciravolo (president)
Products Electric and acoustic guitars Bass guitars
Guitar amplifiers
Owner Hisatake Shibuya
Website schecterguitars.com

Schecter Guitar Research, commonly known simply as Schecter, is a US guitar, bass and amplifier manufacturer. The company was founded in 1976 by David Schecter and originally produced only replacement parts for existing guitars from manufacturers such as Fender and Gibson.[1] Today, the company mass-produces its own line of electric guitars, bass guitars, and steel-string acoustic guitars, and offers hand-built custom instruments and a small line of guitar amplifiers.

History

Custom shop days, 1976–1983

In 1976, David Schecter opened Schecter Guitar Research, a repair shop in Van Nuys, California.[1] The shop manufactured replacement guitar necks and bodies, complete pickup assemblies, bridges, pickguards, tuners, knobs, potentiometers, and other miscellaneous guitar parts. Eventually, Schecter supplied parts to guitar manufacturers such as Fender and Gibson and to Robert Talbot repair shops.[1] By the late 1970s Schecter offered more than 400 guitar parts, but did not offer any finished instruments.[1]

In 1979, Schecter offered, for the first time, its own fully assembled electric guitars. These guitars were custom shop models based on Fender designs. They were considered to be very high quality and very expensive, and were sold only by twenty retailers across the United States.[1]

Schecter guitars and parts have been used by, among others, Gary Holt, Pete Townshend, Jeff Loomis, Mark Knopfler, Ritchie Blackmore, Chris Poland, Synyster Gates, Richard Patrick, Jinxx, Jake Pitts, Tommy Victor, Dan Donegan, Lou Reed, Todd Rundgren, Robin Zander, and Shaun Morgan.[2]

Texan ownership and mass production, 1983–1987

By 1983, Schecter had reached its custom shop production limit and could no longer meet demand. That year, the company was purchased by a group of Texas investors who wanted to build upon Schecter's reputation for quality.[1] The investors moved the company to Dallas, Texas, where they produced above-par quality guitars using both imported parts and Schecter parts under the Schecter name for less than five years.

At the 1984 winter NAMM show, Schecter introduced twelve new guitars and basses, all based on Fender designs. The most popular of these guitars was a Telecaster-style guitar similar to those that Pete Townshend played. Although Townshend never endorsed this model, it was known unofficially as the "Pete Townshend model". Eventually, the Telecaster-style guitar became known as the "Saturn", and the company's Stratocaster-style guitar became known as the "Mercury".

All guitars have the "Lawsuit" peg heads (two small marks on back of headstocks). Schecter was still using Stratocaster and Telecaster headstocks, which Fender had allowed when they were a parts company. It appears this lawsuit may have essentially led to their closing in late 1986 to early 1987. The name was purchased by the current owners in late 1987.

During this period, Schecter managed to sign one notable endorsee, Swedish guitarist Yngwie Malmsteen. Schecter built several custom guitars for Yngwie Malmsteen that featured scalloped necks and reverse headstocks.

Hisatake Shibuya and reform, 1987 – present

In 1987, the Texas investors sold the company to Hisatake Shibuya, a Japanese entrepreneur who also owned the Musicians Institute in Hollywood and ESP Guitars (To this day, Schecter Guitar Research and ESP Guitars have remained separate entities).[1] Shibuya moved the company back to California and returned Schecter to its custom shop roots, devoting all its efforts to manufacturing high-end, expensive custom instruments.

Schecter guitars were once again only available from a few retailers, one of them being Sunset Custom Guitars located in Hollywood, which Hisatake Shibuya also owned. Sunset Custom Guitars happened to be the place where Michael Ciravolo, the future president of Schecter Guitar Research, worked.

In 1995, Schecter introduced the highly sought-after 'S Series' guitars and basses, which were Fender-style instruments. In 1996, Hisatake Shibuya asked Michael Ciravolo to become Schecter's president and run the company. Michael Ciravolo, an experienced musician, brought to the company many well-known musicians as endorsees. These included Robert DeLeo of Stone Temple Pilots, and Jay Noel Yuenger and Sean Yseult of White Zombie, as well as Xavier Rhone of Carbon Nation.

Michael Ciravolo never really liked Fender designs, so he sought to distance the company from its past Fender-style models.[1] Toward that end, he added the "Avenger", "Hellcat", and "Tempest" models to the Schecter catalog. He also wanted to reach out to a new generation of musicians who were ignored by most major guitar manufacturers. Yet, at this point, the company was only producing expensive, custom shop models. (Schecter's maximum output was forty guitars a month.)[1] So, to realize his vision, Ciravolo began searching for a factory that could mass-produce Schecter guitars while maintaining high quality standards.

In 1997, Michael Ciravolo met with several Asian guitar manufacturers at the Tokyo Music Festival and subsequently decided on a factory located in Incheon, South Korea. (Though not known for sure, this location could be the electric guitar factory of World Musical Instrument co. Ltd.) Schecter's guitars would be built in the South Korea factory, after which they would be shipped to the U.S. to be set up in a Schecter shop. At the 1998 summer NAMM show, Schecter introduced the Diamond Series, which included six affordably priced non-custom guitars.

In 1999, Schecter added the seven string "A-7 Avenger" guitar to the 'Diamond Series'. It also introduced the "C-1", which was debuted by Jerry Horton in Papa Roach's "Last Resort" music video. The Diamond Series is still in production to this day.

Expanded custom shop, return of USA production, and Schecter Amplification, 2013 - present

In 2012, it was announced that Schecter expanded their custom shop, adding 14,000 square feet to the facility. Later the same year, Schecter announced a new line of USA-built guitars that would bring the company back to its "roots". This included the acquisition of several CNC machines from Haas Automation and a new 1,500 square feet spray booth. The new line would be called the "USA Production Series." These guitars were officially debuted at the 2013 Winter NAMM show. Schecter also announced a new line of hand-wound electric guitar and bass pickups, that would be available on USA Production and custom shop models, and possibly will be available for purchase in 2013.

Along with the announcement of the USA Production Series, Schecter announced their introduction into the amplification market. These new amps would be designed in part with well-known amplifier designer James Brown, who is most famous for designing the Peavey 5150 amplifier in part with Eddie Van Halen and his line of effect pedals under the Amptweaker name. The amps first announced were the "Hellraiser USA 100", "Hellraiser Stage 100", "Hellwin USA 100", and the "Hellwin Stage 100". The USA versions are built in Schecter's USA custom shop, while the Stage series is built overseas. The Hellwin is the signature amp for Avenged Sevenfold guitarist Synyster Gates, who helped design the head with James Brown. Both amps make use of EL34 power tubes, an on-board noise gate, a passive and active input that compensate for the output difference by changing the circuit instead of reducing output, and a "Focus" control that adjusts the low end response. The differences between the Hellwin and the Hellraiser is the Hellwin's use of MIDI to control the amp. The Hellwin is also a 3-channel amp, as opposed to the Hellraiser's 2-channel design. Along with these amps, Schecter introduced a line of speaker cabinets, one featuring a 200W sub-woofer. called the "Depth Charge", that would increase the cabinet's bass response. These amps were debuted, along with the USA Production Line, at Winter NAMM 2013.

Diamond Series

The Diamond Series was first introduced in 1998, and consists of all the non-custom, mass-produced Schecter models.[3] The Diamond Series is further divided into groups of guitars, which share common design characteristics. Schecter has stated that it will not customize any Diamond Series guitar, thus any Diamond Series guitar is sold "as is".

Although there are a large variety of models available in the Diamond range, many are 'mixed and matched' parts from different Schecter guitars. For example, all "Omen", "C", "Hellraiser" and "Damien" basses have the same body shape, although some have set necks rather than bolt on necks, different finish colors, and different woods. However, Schecter produces many different guitars from a smaller number of core parts. This mix and match culture has the benefit of allowing guitarists to find a Schecter to fit their exact requirements, but negatively gives less of a 'core product' range as shown by Gibson Guitars who only have a small range of guitars available.

Some of the best known guitars made by Schecter are the 'C Series' in various configurations such as the "Hellraiser" and "Blackjack" models, and the 'S Series', which included the "S-1 Elite" (double cut) guitars, which held some visual similarity to Gibson's Les Paul Double Cut and double cut Melody Maker — and the "S-1" (a less fancy version of the S-1 Elite). The 'Elite' versions of Schecter's mass-produced instruments often include an arched top, abalone binding, a bound fretboard and a bound headstock with a headstock finish matched with that of the guitar body. Despite all the visually impressive dressing these instruments remained quite affordable and the quality standard did not suffer. Pickups on many of the mass-produced Schecter models are almost always 'Duncan Designed' humbuckers (double coil pickups based on Seymour Duncan's pickup specifications), usually with a 'push-pull' coil splitter control that allows the full humbucker pickup sound to be 'split' into the sharper tone characteristic of single coil pickups.

Schecter has also made an effort to appeal to more select market segments by occasionally producing a very limited run of its mass-produced guitar models equipped with novelty finishes. The 'Aviation Series', which appeared around 2006 and ran for about a year, took certain mass-produced model bodies (the PT, Tempest, S-1, etc.) and equipped them with World War II US (and British) aircraft color and marking patterns, and even special pickup covers that look like cooling louvers.

Schecter is also a leader in the seven-string, and recently, eight-string guitar market. Schecter's 'Diamond series' guitars have enjoyed a growing positive reputation through the use of quality components such as TonePros locking bridge products on non-tremolo models and Original Floyd Rose double locking tremolos on many of the six and seven string models. Many models also feature USA EMG or Seymour Duncan pick-ups and Grover tuners.

Products

Guitars

A Schecter Omen Extreme (7 String) Guitar

The following list of guitars are correct as appears on the Schecter Website [4]

Acoustics

The following list of acoustics are correct as appears on the Schecter Website (Accessed 25 February 2012):[5]

Basses

A Schecter C5 Bass

The following list of basses are correct as appears on the Schecter Website (Accessed 18 December 2008):[4]

Discontinued instruments

The following instruments are no longer in production by Schecter Guitars as of 2012. Although, some guitars, like the Damien-7, The Banshee Elite, and Hellcat VI have been brought back for 2016 and are currently available to purchase on Schecter's official website.:[5]

Guitars

Hollowbody

Acoustics

Basses

Custom Shop

As well as the mass-produced Diamond Series, Schecter offers a custom guitar service. On their website, Schecter says, "The Custom Shop is reserved only for orders made through a Schecter Authorized Dealer".

Example projects[6] include:

References

  1. 1 2 3 4 5 6 7 8 9 Gill, Chris (September 2006). "Schecter: A Guitar History". Guitar World. 27 (9). pp. 76–80.
  2. "Artists". Schecter Guitar Research. Retrieved April 27, 2013.
  3. Molenda, Michael (August 2006). "Schecter Turns 30". guitarplayer.com. Archived from the original on 2007-09-27. Retrieved 2007-04-15.
  4. 1 2 Schecter Guitars Website, http://www.schecterguitars.com/index.asp, accessed 18 December 2008, 21:00
  5. 1 2 Items not present on Schecter Guitars website, http://www.schecterguitars.com/index.asp, Items are shown in discontinued section and in the past catalogs, accessed 25 February 2012, 06:50
  6. Displayed on the Schecter Guitars Custom Shop page, http://www.schecterguitars.com/custom.asp, accessed December 18th 2008, 21:40


External links

This article is issued from Wikipedia - version of the 11/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.