SR connector

An SR connector, or CP connector (from Russian: Cоединитель Pадиочастотный, radio frequency connector) is a type of Russian made RF connector for coaxial cables. Based on the American BNC connector, the SR connector differs slightly in dimensions due to discrepancies in imperial to metric conversion, though with some force they can still be mated.[1] There are however types of SR connectors that do not resemble their American counterpart.

Most SR connectors are variants of SR-50 (50 Ω) or SR-75 (75 Ω) versions, with the SR-75 typically having a thinner center pin. They often resemble C connectors in shape, and have threaded inserts similar to N connectors.[1] Further numerical suffixes denote specific kinds of connectors, for instance the CP 75-164 is a much larger high power connector, designed for upwards of 3000W, with a similar appearance to an N or UHF type. The various letters after the number refer to the dielectric material used.

Below is a breakdown of the various suffixes used in the order they would appear:

Symbol Meaning Details
Г (G) Hermetically sealed From Russian Герметичный
50 or 75 Design impedance of the connector in ohms
### Three numeral connector type designation i.e. CP-75-164
Ф (F) or П (P) Dielectric material (either фторопласт (PTFE/Teflon)

or полиэтилен (Polyethylene)

В (V) Meets GOST standardization requirements From Russian Bсеклиматическое

исполнение по ГОСТ В 20.39.404-81

See also

References

  1. 1 2 "Russian Coax Connectors". www.nd2x.net. Retrieved 2016-01-28.
This article is issued from Wikipedia - version of the 10/5/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.