Putilov Stal-5

Stal-5
Role Transport
National origin USSR
Designer A.I. Putilov
First flight late 1935 (1/4scale model)




The Stal-5 (Stal – steel) was a transport aircraft designed in the USSR from 1933.

Development

In 1933 Putilov started the design of a flying wing 18 passenger transport with the intention of achieving very high levels of efficiency. The broad rectangular centre section housed the cabin and a fully glazed cockpit on the centre line, with long and shallow fins at its extremities and a large elevator at the trailing edge. The tapered outer wings carried the slotted flaps and ailerons. The structure was to be entirely formed from Enerzh-6 stainless steel tubing and rolled sections covered with bakelite-impregnated ply (similar to Delta-wood) on the centre section and fabric elsewhere. Structural test specimens were tested, including a complete wing spar, and a 1/4 scale model powered by two 45 hp Salmson engines was built and flown by V.V. Karpov and Ya.G. Paul in 1935. The results of the scale model test flights were not encouraging, displaying poor handling and stability. After adjustments failed to yield better results further work was abandoned.

Variants

Specifications (Stal-5)

Data from Gunston, Bill. "Encyclopaedia of Russian Aircraft 1875-1995". London:Osprey. 1995. ISBN 1-85532-405-9

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era
Related lists

References

    • Gunston, Bill. “The Osprey Encyclopaedia of Russian Aircraft 1875–1995”. London, Osprey. 1995. ISBN 1-85532-405-9

    External links

    This article is issued from Wikipedia - version of the 6/24/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.