Nonlinear distortion

Nonlinear distortion is a term used (in fields such as electronics, audio and telecommunications) to describe the phenomenon of a non-linear relationship between the "input" and "output" signals of - for example - an electronic device.

Model

For many devices, a linear model is accurate only for small signal levels. For example, at 2 volts input, a typical audio amplifier might put out 20 V, meaning the linear gain is 10 V/V. For 3 V input, it might then output 30 V. However, the model implies that at 50 V input it would produce 500 V, which is not possible with most amplifiers.

Mathematically, the input-output relationship of many devices should be described by a polynomial or Taylor series, as shown below.

$v=\sum _{k=1}^{\infty }a_{k}u^{k}$

For larger values of u, the higher order coefficients such as $a_{2}$ and $a_{3}$ come into play.

Effects of nonlinearity

Nonlinearity can have several effects, which are unwanted in typical situations. The $a_{3}$ term for example would, when the input is a sine wave with frequency $\omega$ , result in an extra sine wave at $3\omega$ , as shown below.

$v=(a_{1}+{\frac {3}{4}}a_{3})sin(\omega t)-{\frac {1}{4}}a_{3}sin(3\omega t)$

In certain situations, this spurious signal can be filtered away because the "harmonic" $3\omega$ lies far outside the frequency range used, but in cable television, for example, third order distortion could cause a 200 MHz signal to interfere with the regular channel at 600 MHz.

Nonlinear distortion applied to a superposition of two signals at different frequencies causes the circuit to act as a frequency mixer, creating intermodulation distortion.

This article is issued from Wikipedia - version of the 3/12/2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.