Nissan D engine

There were more than one engine type named Nissan D-series

D10

The D10 was a 0.9 L (860 cc/52 cu in) engine is a flat-head side valve automobile engine produced from 1952 through 1955. Bore was 60 mm (2.4 in) and stroke was 76 mm (3.0 in) in the undersquare British style. The engine is related to the Austin A-Series engine.

Output was 25 hp (18.6 kW) and 35.4 lb·ft (48 Nm) with a single carburetor.

Applications

D11

The D11 is a 1,138 cc (69.4 cu in) pushrod, three main bearing, inline-four with wedge combustion chambers, and a bore & stroke of 73 mm x 68 mm (2.874 x 2.677 in), a compression ratio of 8:1, and was rated at 29 PS (21 kW) at 2880 rpm (D11-PU 41-U model). It weighed 137.5 kg. Similar to the E & J series, and Austin A series in layout, it had a gear driven cam drive similar to the larger SD series diesels, it was used in Datsun FG003 forklifts in the 1960s and then in the NFG101C forklift in the 1970s.

Applications

D12

The D12 is a 1,189 cc (72.6 cu in) version of Nissan/Datsun's D-series inline-four engine. Also an overhead valve design, it produces 56 PS (41 kW) at 4800 rpm.[1]

Applications

See also

References

  1. ↑ Bent, Alan. "1968 Datsun Cabstar A320". Earlydatsun.com. Retrieved 2013-12-21.


This article is issued from Wikipedia - version of the 8/21/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.