Locomotive Duplex
![]() | |||||||||||||
| |||||||||||||
|
Locomotive Duplex was an experimental 4-cylinder steam locomotive designed by John Haswell of the Austrian State Railway Works at Vienna and built in 1861. It was exhibited at the International Exhibition of 1862 and was then used on the line from Praha to Podmokly (part of Děčín today) where it worked till 1900.[1] Praha (Prague) was the capital of Bohemia, which became part of the Austro-Hungarian Empire in 1867.
Overview
This 4-2-0 locomotive was the last of 12 engines of the same type. Only this one was equipped with 2 cylinders on each side. The angle between the crankpins on one side was 180° with the pistons going opposite directions. There was one common valve gear with crossed steam channels. The angle between the pairs of engines on each side was normal at 90°.
Purpose
The main idea was to eliminate dynamic forces. This was successfully exhibited when the locomotive was hung on chains. It silently simulated a run at maximum speed (60 km/h) without swinging.
See also
References
- ↑ "Balanced Locomotives". Douglas-self.com. 2004-08-28. Retrieved 2013-10-04.
Sources
- Jindřich Bek: Atlas Lokomotiv - historické lokomotivy, page 94, NADAS Praha 1979