ISO 6346

BIC code on the end of a shipping container

ISO-code and dimension/load table at several newly washed containers

ISO 6346 is an international standard covering the coding, identification and marking of intermodal (shipping) containers used within containerized intermodal freight transport. The standard establishes a visual identification system for every container that includes a unique serial number (with check digit), the owner, a country code, a size, type and equipment category as well as any operational marks. The standard is managed by the International Container Bureau (BIC).

Identification System

Example of an ISO 6346 conform container number:

Owner Code

The owner code consists of three capital letters of the Latin alphabet to indicate the owner or principal operator of the container. Such code needs to be registered at the Bureau International des Conteneurs in Paris to ensure uniqueness worldwide.

Equipment Category Identifier

The equipment category identifier consists of one of the following capital letters of the Latin alphabet:

• U for all freight containers
• J for detachable freight container-related equipment
• Z for trailers and chassis

Under the ISO code, then, only U, J, and Z are in use—the reefer container is identified by means of the size type code.

Serial Number

The serial number consists of 6 numeric digits, assigned by the owner or operator, uniquely identifying the container within that owner/operator's fleet.

Check Digit

The check digit consists of one numeric digit providing a means of validating the recording and transmission accuracies of the owner code and serial number.

Conversion Algorithm

To compute the check digit, the letters have to be converted to numbers. This is done in three steps:

Calculation Step 1

An equivalent numerical value is assigned to each letter of the alphabet, beginning with 10 for the letter A (11 and multiples thereof are omitted):

The individual digits of the serial number keep their numeric value.

Calculation Step 2

Each of the numbers calculated in step 1 is multiplied by 2^position, where position is the exponent to base 2. Position starts at 0, from left to right.

The following table shows the multiplication factors:

Calculation Step 3

If the final difference is 10, then the check digit becomes 0. To ensure that this does not happen, the standard recommends that serial numbers should not be used which produce a final difference of 10; however, there are containers in the market which do not follow this recommendation, so handling this case has to be included if a check digit calculator is programmed.

Notice that step (ii) to (v) is a calculation of the remainder found after division of (i) by 11. Most programming languages have a modulo operator for this. Attention should be paid on how it is working in the language chosen; i. e. if it is giving back the decimal rest or the integer rest in order to get proper results. 11 is used as divisor because a container number has 11 letters and digits in total. In step 1 the numbers 11, 22 and 33 are left out as they are multiples of the divisor.

Example

Code Samples

The following are the algorithm in various programming languages:

Code Sample (Matlab)

Below is a code Snippet implementing the above algorithm in MATLAB validating string "cid":

%% Step 1 
char2num = [10 12 13 14 15 16 17 18 19 20 21 23 24 25 26 27 28 29 30 31 32 34 35 36 37 38]; 
msk = logical([1 1 1 1 0 0 0 0 0 0 0]);  % mask separating digits from numbers
cid( msk) = char2num(cid( msk)-'A'+1);   % letters to numbers conversion
cid(~msk) =          cid(~msk)-'1'+1;    % digit characters to numbers conversion
vec = double(cid);
%% Step 2
num  = sum(vec(1:10).* 2.^(0:9));
%% Step 3
check_digit = mod(mod(num,11),10);
valid = (check_digit==vec(11));

Code Sample (DELPHİ or pascal)

function knt(x: String): Boolean;
var
dizi:Array ['A'..'Z'] of Integer;
acc,ax:Extended;
i,remx,s:integer;
z:Boolean;
begin
z:=False;
dizi['A']:=10; dizi['B']:=12; dizi['C']:=13; dizi['D']:=14; dizi['E']:=15; dizi['F']:=16;
dizi['G']:=17; dizi['H']:=18; dizi['I']:=19; dizi['J']:=20; dizi['K']:=21; dizi['L']:=23;
dizi['M']:=24; dizi['N']:=25; dizi['O']:=26; dizi['P']:=27; dizi['Q']:=28; dizi['R']:=29;
dizi['S']:=30; dizi['T']:=31; dizi['U']:=32; dizi['V']:=34; dizi['W']:=35; dizi['X']:=36;
dizi['Y']:=37; dizi['Z']:=38;
acc:=0;
s:=0;
for i :=1  to 10  do
begin
s:=s*2;if s<1 then s:=1;
  if i<5 then
    ax:=(dizi[x[i]]*s)
  else
    ax:=(StrToInt(x[i])*s);
acc:=acc+ax;
end;
remx:=(Floor(acc) mod 11) mod 10;
if (Length(x)=11) and (remx=StrToInt(x[11])) then
z:=True;
Result:= z;
end;

Code Sample (Visual Basic)

Below is the Visual Basic (VBA) code to create a custom "ISO6346Check" function in Microsoft Excel (Alt + F11) that returns the correct check digit:

Function ISO6346Check(k As String) ' Calculates the ISO Shipping Container Check Digit
Dim i%, s&
Application.Volatile
For i = 1 To 10
s = s + IIf(i < 5, Fix(11 * (Asc(Mid(k, i)) - 56) / 10) + 1, Asc(Mid(k, i)) - 48) * 2 ^ (i - 1)
Next i
ISO6346Check = (s - Fix(s / 11) * 11) Mod 10
End Function

Code Sample (Python)

Below is Python (2.7) code to validate the string "cid":

>>> cid = 'CSQU3054383'
>>> first10 = cid[0:-1]
>>> check = cid[-1]
>>> char2num = {
...     '0': 0, '1': 1, '2': 2, '3': 3, '4': 4, '5': 5, '6': 6, '7': 7, '8': 8,
...     '9': 9, 'A': 10, 'B': 12, 'C': 13, 'D': 14, 'E': 15, 'F': 16, 'G': 17,
...     'H': 18, 'I': 19, 'J': 20, 'K': 21, 'L': 23, 'M': 24, 'N': 25, 'O': 26,
...     'P': 27, 'Q': 28, 'R': 29, 'S': 30, 'T': 31, 'U': 32, 'V': 34, 'W': 35,
...     'X': 36, 'Y': 37, 'Z': 38,
... }
>>> total = sum(char2num[c] * 2**x for x, c in enumerate(first10))
>>> (total % 11) % 10 == char2num[check]
True

Code Sample (Javascript)

Below is the Javascript code to create a custom "ISO6346Check":

function ISO6346Check(con) {
    if (!con || con == "" || con.length != 11) { return false; }
    con = con.toUpperCase();
    var re = /^[A-Z]{4}\d{7}/;
    if (re.test(con)) {
        var sum = 0;
        for (i = 0; i < 10; i++) {
            var n = con.substr(i, 1);
            if (i < 4) {
                n = "0123456789A?BCDEFGHIJK?LMNOPQRSTU?VWXYZ".indexOf(con.substr(i, 1));
            }
            n *= Math.pow(2, i); //2的i次方
            sum += n;
        }
        if (con.substr(0, 4) == "HLCU") {
            sum -= 2;
        }
        sum %= 11;
        sum %= 10; //余数为10的取0
        return sum == con.substr(10);
    } else {
        return false; //不匹配正则表达式   
    }
}

Code Sample (Excel)

Below is an Excel Formula to validate container number in Cell A1

=IF(LEN(A1)=11,IF((MID(A1,11,1)*1)=(1*SUBSTITUTE((IF(MID(A1,1,1)="A",10,IF(MID(A1,1,1)="B",12,IF(MID(A1,1,1)="C",13,IF(MID(A1,1,1)="D",14,
IF(MID(A1,1,1)="E",15,IF(MID(A1,1,1)="F",16,IF(MID(A1,1,1)="G",17,IF(MID(A1,1,1)="H",18,IF(MID(A1,1,1)="I",19,
IF(MID(A1,1,1)="J",20,IF(MID(A1,1,1)="K",21,IF(MID(A1,1,1)="L",23,IF(MID(A1,1,1)="M",24,IF(MID(A1,1,1)="N",25,
IF(MID(A1,1,1)="O",26,IF(MID(A1,1,1)="P",27,IF(MID(A1,1,1)="Q",28,IF(MID(A1,1,1)="R",29,IF(MID(A1,1,1)="S",30,
IF(MID(A1,1,1)="T",31,IF(MID(A1,1,1)="U",32,IF(MID(A1,1,1)="V",34,IF(MID(A1,1,1)="W",35,IF(MID(A1,1,1)="X",36,
IF(MID(A1,1,1)="Y",37,IF(MID(A1,1,1)="Z",38,FALSE)))))))))))))))))))))))))))+
(IF(MID(A1,2,1)="A",10,IF(MID(A1,2,1)="B",12,IF(MID(A1,2,1)="C",13,IF(MID(A1,2,1)="D",14,IF(MID(A1,2,1)="E",15,
IF(MID(A1,2,1)="F",16,IF(MID(A1,2,1)="G",17,IF(MID(A1,2,1)="H",18,IF(MID(A1,2,1)="I",19,IF(MID(A1,2,1)="J",20,
IF(MID(A1,2,1)="K",21,IF(MID(A1,2,1)="L",23,IF(MID(A1,2,1)="M",24,IF(MID(A1,2,1)="N",25,IF(MID(A1,2,1)="O",26,
IF(MID(A1,2,1)="P",27,IF(MID(A1,2,1)="Q",28,IF(MID(A1,2,1)="R",29,IF(MID(A1,2,1)="S",30,IF(MID(A1,2,1)="T",31,
IF(MID(A1,2,1)="U",32,IF(MID(A1,2,1)="V",34,IF(MID(A1,2,1)="W",35,IF(MID(A1,2,1)="X",36,IF(MID(A1,2,1)="Y",37,
IF(MID(A1,2,1)="Z",38,FALSE))))))))))))))))))))))))))*2)+(IF(MID(A1,3,1)="A",10,IF(MID(A1,3,1)="B",12,IF(MID(A1,3,1)="C",13,IF(MID(A1,3,1)="D",14,IF(MID(A1,3,1)="E",15,
IF(MID(A1,3,1)="F",16,IF(MID(A1,3,1)="G",17,IF(MID(A1,3,1)="H",18,IF(MID(A1,3,1)="I",19,IF(MID(A1,3,1)="J",20,
IF(MID(A1,3,1)="K",21,IF(MID(A1,3,1)="L",23,IF(MID(A1,3,1)="M",24,IF(MID(A1,3,1)="N",25,IF(MID(A1,3,1)="O",26,
IF(MID(A1,3,1)="P",27,IF(MID(A1,3,1)="Q",28,IF(MID(A1,3,1)="R",29,IF(MID(A1,3,1)="S",30,IF(MID(A1,3,1)="T",31,
IF(MID(A1,3,1)="U",32,IF(MID(A1,3,1)="V",34,IF(MID(A1,3,1)="W",35,IF(MID(A1,3,1)="X",36,IF(MID(A1,3,1)="Y",37,
IF(MID(A1,3,1)="Z",38,FALSE))))))))))))))))))))))))))*4)+(IF(MID(A1,4,1)="A",10,IF(MID(A1,4,1)="B",12,IF(MID(A1,4,1)="C",13,IF(MID(A1,4,1)="D",14,IF(MID(A1,4,1)="E",15,
IF(MID(A1,4,1)="F",16,IF(MID(A1,4,1)="G",17,IF(MID(A1,4,1)="H",18,IF(MID(A1,4,1)="I",19,IF(MID(A1,4,1)="J",20,
IF(MID(A1,4,1)="K",21,IF(MID(A1,4,1)="L",23,IF(MID(A1,4,1)="M",24,IF(MID(A1,4,1)="N",25,IF(MID(A1,4,1)="O",26,
IF(MID(A1,4,1)="P",27,IF(MID(A1,4,1)="Q",28,IF(MID(A1,4,1)="R",29,IF(MID(A1,4,1)="S",30,IF(MID(A1,4,1)="T",31,
IF(MID(A1,4,1)="U",32,IF(MID(A1,4,1)="V",34,IF(MID(A1,4,1)="W",35,IF(MID(A1,4,1)="X",36,IF(MID(A1,4,1)="Y",37,
IF(MID(A1,4,1)="Z",38,FALSE))))))))))))))))))))))))))*8)+(MID(A1,5,1)*16)+(MID(A1,6,1)*32)+(MID(A1,7,1)*64)+(MID(A1,8,1)*128)+(MID(A1,9,1)*256)+(MID(A1,10,1)*512)-11*ROUNDDOWN((((IF(MID(A1,1,1)="A",10,IF(MID(A1,1,1)="B",12,IF(MID(A1,1,1)="C",13,
IF(MID(A1,1,1)="D",14,IF(MID(A1,1,1)="E",15,IF(MID(A1,1,1)="F",16,IF(MID(A1,1,1)="G",17,IF(MID(A1,1,1)="H",18,
IF(MID(A1,1,1)="I",19,IF(MID(A1,1,1)="J",20,IF(MID(A1,1,1)="K",21,IF(MID(A1,1,1)="L",23,IF(MID(A1,1,1)="M",24,
IF(MID(A1,1,1)="N",25,IF(MID(A1,1,1)="O",26,IF(MID(A1,1,1)="P",27,IF(MID(A1,1,1)="Q",28,IF(MID(A1,1,1)="R",29,
IF(MID(A1,1,1)="S",30,IF(MID(A1,1,1)="T",31,IF(MID(A1,1,1)="U",32,IF(MID(A1,1,1)="V",34,IF(MID(A1,1,1)="W",35,
IF(MID(A1,1,1)="X",36,IF(MID(A1,1,1)="Y",37,IF(MID(A1,1,1)="Z",38,FALSE)))))))))))))))))))))))))))+(IF(MID(A1,2,1)="A",10,IF(MID(A1,2,1)="B",12,IF(MID(A1,2,1)="C",13,IF(MID(A1,2,1)="D",14,IF(MID(A1,2,1)="E",15,
IF(MID(A1,2,1)="F",16,IF(MID(A1,2,1)="G",17,IF(MID(A1,2,1)="H",18,IF(MID(A1,2,1)="I",19,IF(MID(A1,2,1)="J",20,
IF(MID(A1,2,1)="K",21,IF(MID(A1,2,1)="L",23,IF(MID(A1,2,1)="M",24,IF(MID(A1,2,1)="N",25,IF(MID(A1,2,1)="O",26,
IF(MID(A1,2,1)="P",27,IF(MID(A1,2,1)="Q",28,IF(MID(A1,2,1)="R",29,IF(MID(A1,2,1)="S",30,IF(MID(A1,2,1)="T",31,
IF(MID(A1,2,1)="U",32,IF(MID(A1,2,1)="V",34,IF(MID(A1,2,1)="W",35,IF(MID(A1,2,1)="X",36,IF(MID(A1,2,1)="Y",37,
IF(MID(A1,2,1)="Z",38,FALSE))))))))))))))))))))))))))*2)+(IF(MID(A1,3,1)="A",10,IF(MID(A1,3,1)="B",12,IF(MID(A1,3,1)="C",13,IF(MID(A1,3,1)="D",14,IF(MID(A1,3,1)="E",15,
IF(MID(A1,3,1)="F",16,IF(MID(A1,3,1)="G",17,IF(MID(A1,3,1)="H",18,IF(MID(A1,3,1)="I",19,IF(MID(A1,3,1)="J",20,
IF(MID(A1,3,1)="K",21,IF(MID(A1,3,1)="L",23,IF(MID(A1,3,1)="M",24,IF(MID(A1,3,1)="N",25,IF(MID(A1,3,1)="O",26,
IF(MID(A1,3,1)="P",27,IF(MID(A1,3,1)="Q",28,IF(MID(A1,3,1)="R",29,IF(MID(A1,3,1)="S",30,IF(MID(A1,3,1)="T",31,
IF(MID(A1,3,1)="U",32,IF(MID(A1,3,1)="V",34,IF(MID(A1,3,1)="W",35,IF(MID(A1,3,1)="X",36,IF(MID(A1,3,1)="Y",37,
IF(MID(A1,3,1)="Z",38,FALSE))))))))))))))))))))))))))*4)+(IF(MID(A1,4,1)="A",10,IF(MID(A1,4,1)="B",12,IF(MID(A1,4,1)="C",13,IF(MID(A1,4,1)="D",14,IF(MID(A1,4,1)="E",15,
IF(MID(A1,4,1)="F",16,IF(MID(A1,4,1)="G",17,IF(MID(A1,4,1)="H",18,IF(MID(A1,4,1)="I",19,IF(MID(A1,4,1)="J",20,
IF(MID(A1,4,1)="K",21,IF(MID(A1,4,1)="L",23,IF(MID(A1,4,1)="M",24,IF(MID(A1,4,1)="N",25,IF(MID(A1,4,1)="O",26,
IF(MID(A1,4,1)="P",27,IF(MID(A1,4,1)="Q",28,IF(MID(A1,4,1)="R",29,IF(MID(A1,4,1)="S",30,IF(MID(A1,4,1)="T",31,
IF(MID(A1,4,1)="U",32,IF(MID(A1,4,1)="V",34,IF(MID(A1,4,1)="W",35,IF(MID(A1,4,1)="X",36,IF(MID(A1,4,1)="Y",37,
IF(MID(A1,4,1)="Z",38,FALSE))))))))))))))))))))))))))*8)+(MID(A1,5,1)*16)+(MID(A1,6,1)*32)+(MID(A1,7,1)*64)+(MID(A1,8,1)*128)+(MID(A1,9,1)*256)+(MID(A1,10,1)*512))/11),0),10,0)),"VALID","INVALID"),"INVALID")

Below is a shorter Excel formula for the same function (container number in cell A1):

=IF(LEN(A1)=11,IF((MID(A1,11,1)*1)=MOD(IF(PROPER(MID(A1,1,1))="A",10,IF(AND(CODE(MID(A1,1,1))>65,CODE(MID(A1,1,1))<=75),CODE(MID(A1,1,1))-54,IF(AND(CODE(MID(A1,1,1))>75,CODE(MID(A1,1,1))<=85),CODE(MID(A1,1,1))-53,IF(AND(CODE(MID(A1,1,1))>85,CODE(MID(A1,1,1))<=90),CODE(MID(A1,1,1))-52,MID(A1,1,1)))))*1+IF(PROPER(MID(A1,2,1))="A",10,IF(AND(CODE(MID(A1,2,1))>65,CODE(MID(A1,2,1))<=75),CODE(MID(A1,2,1))-54,IF(AND(CODE(MID(A1,2,1))>75,CODE(MID(A1,2,1))<=85),CODE(MID(A1,2,1))-53,IF(AND(CODE(MID(A1,2,1))>85,CODE(MID(A1,2,1))<=90),CODE(MID(A1,2,1))-52,MID(A1,2,1)))))*2+IF(PROPER(MID(A1,3,1))="A",10,IF(AND(CODE(MID(A1,3,1))>65,CODE(MID(A1,3,1))<=75),CODE(MID(A1,3,1))-54,IF(AND(CODE(MID(A1,3,1))>75,CODE(MID(A1,3,1))<=85),CODE(MID(A1,3,1))-53,IF(AND(CODE(MID(A1,3,1))>85,CODE(MID(A1,3,1))<=90),CODE(MID(A1,3,1))-52,MID(A1,3,1)))))*4+IF(PROPER(MID(A1,4,1))="A",10,IF(AND(CODE(MID(A1,4,1))>65,CODE(MID(A1,4,1))<=75),CODE(MID(A1,4,1))-54,IF(AND(CODE(MID(A1,4,1))>75,CODE(MID(A1,4,1))<=85),CODE(MID(A1,4,1))-53,IF(AND(CODE(MID(A1,4,1))>85,CODE(MID(A1,4,1))<=90),CODE(MID(A1,4,1))-52,MID(A1,4,1)))))*8+MID(A1,5,1)*16+MID(A1,6,1)*32+MID(A1,7,1)*64+MID(A1,8,1)*128+MID(A1,9,1)*256+MID(A1,10,1)*512,11),"VALID","INVALID"),"INVALID")

Code Sample (PHP)

Below is the PHP code to validate a container number:

function checkDigit($mark){
    $char2num = ['A'=>10, 'B'=>12, 'C'=>13, 'D'=>14, 'E'=>15, 'F'=>16, 'G'=>17, 'H'=>18, 'I'=>19, 'J'=>20, 'K'=>21, 'L'=>23, 'M'=>24, 'N'=>25, 'O'=>26, 'P'=>27, 'Q'=>28, 'R'=>29, 'S'=>30, 'T'=>31, 'U'=>32, 'V'=>34, 'W'=>35, 'X'=>36, 'Y'=>37, 'Z'=>38];

    $acc=0;
    $num=str_split($mark);
    for($i=0;$i<10;$i++){
        if($i<4) $acc+=($char2num[$num[$i]]*pow(2,$i));
        else $acc+=$num[$i]*pow(2,$i);
    }
    $rem = $acc % 11;
    if ($rem == 10) $rem = 0;
    if(strlen($mark)==11 && $num[10]==$rem) return true;
    return false;
}

Code Sample (Java)

Below is the Java code do validate a container number:

public static boolean isContainerNumberValid(String pCid){
    if(pCid == null || pCid.length() != 11){
        return false;
    }
    String char2num = "0123456789A?BCDEFGHIJK?LMNOPQRSTU?VWXYZ";
    int sum = 0;
    for (int i = 0; i < 10; i++) {
        int n = (char2num.indexOf(pCid.charAt(i)));
        n *= Math.pow(2, i);
        sum += n;
    }
    int rem = (sum % 11) % 10;
    return char2num.indexOf(pCid.charAt(10)) == rem;
}

Code Sample (Visual FoxPro)

Below is a VFP codesample, adopted from the above VB sample

FUNCTION ISO6346Check(cTest AS STRING)
	LOCAL i, nResult
	nResult = 0
	
	FOR i = 1 TO 10
		nResult = nResult + IIF(i < 5, FLOOR(11 * (ASC( SUBSTR(cTest,i,1)) - 56) / 10) + 1, ASC( SUBSTR(cTest,i,1)) - 48) * 2 ^ (i - 1)
	ENDFOR
	
	RETURN (nResult - FLOOR(nResult / 11) * 11) % 10

ENDFUNC

Code Sample (Eiffel)

Below is an Eiffel code sample.

	check_digit: CHARACTER
		note

		local
			l_d1, l_d2, l_d3, l_d4, l_d5, l_d6, l_d7, l_d8, l_d9, l_d10,
			l_sum1,
			l_sum2: INTEGER
			l_div_by_11: REAL_64
		do
			l_d1 := conversion_hash.at (owner_code [1]) * 1
			l_d2 := conversion_hash.at (owner_code [2]) * 2
			l_d3 := conversion_hash.at (owner_code [3]) * 4
			l_d4 := conversion_hash.at (equipment_category_id) * 8
			l_d5 := serial_number [1].out.to_integer * 16
			l_d6 := serial_number [2].out.to_integer * 32
			l_d7 := serial_number [3].out.to_integer * 64
			l_d8 := serial_number [4].out.to_integer * 128
			l_d9 := serial_number [5].out.to_integer * 256
			l_d10 := serial_number [6].out.to_integer * 512
			l_sum1 := l_d1 + l_d2 + l_d3 + l_d4 + l_d5 + l_d6 + l_d7 + l_d8 + l_d9 + l_d10
			l_div_by_11 := l_sum1 / 11
			l_sum2 := l_div_by_11.truncated_to_integer
			Result := (l_sum1 - (l_sum2 * 11)).out [1]
		end

	conversion_hash: HASH_TABLE [INTEGER, CHARACTER]
		once
			create Result.make (26)
			Result.force (10, 'A')
			Result.force (12, 'B')
			Result.force (13, 'C')
			Result.force (14, 'D')
			Result.force (15, 'E')
			Result.force (16, 'F')
			Result.force (17, 'G')
			Result.force (18, 'H')
			Result.force (19, 'I')
			Result.force (30, 'J')
			Result.force (21, 'K')
			Result.force (23, 'L')
			Result.force (24, 'M')
			Result.force (25, 'N')
			Result.force (26, 'O')
			Result.force (27, 'P')
			Result.force (28, 'Q')
			Result.force (29, 'R')
			Result.force (30, 'S')
			Result.force (31, 'T')
			Result.force (32, 'U')
			Result.force (34, 'V')
			Result.force (35, 'W')
			Result.force (36, 'X')
			Result.force (37, 'Y')
			Result.force (38, 'Z')
		ensure
			has_26: Result.count = 26
		end

Practical Problems

In day-to-day business it happens that containers do appear which do not follow the ISO 6346 identification at all; however, they are fully CSC safety approved containers. Usually these are "shippers owned" containers, which means that they are not owned by the carrier but supplied by the cargo owners (shippers). They may have no registered owner code and no category identifier and have no check digit. It is advisable to follow ISO 6346 as the absence of a compliant identification code causes problems for both carriers and container terminals to correctly identify the equipment and properly deliver the cargo, because computer systems require ISO 6346 conformant naming and as such missing prefixes are invented. For example, YYYY at the carrier and XXXX at the terminal causes the equipment to mismatch. Moreover, since ISO 6346 identification has become a requirement in international Customs conventions (Customs Conventions on Containers and Istanbul Convention), many Customs Administrations have begun validating that containers are marked as per the standard.

Size and Type Codes

The codes are compiled of the following elements:

• First character, representing the length (coded)
• Second character, representing the width and height (coded)
• Third and fourth character indicating the type of the container

The following is an overview of the most common codes:

Use the below to calculate Size/Type of a less commonly used ISO 6346 containers:

Country Code (Optional)

The country code consists of two capital letters of the Latin alphabet as described in ISO 3166. It indicates the country where the code is registered not the nationality of the owner or operator of the container. The letters of the code shall not be less than 100 mm high.

Mandatory Operational Marks

Operational marks are intended solely to convey information requested for the movement of containers or give visual warnings. They relate to

• the weight of containers
• a symbol to denote air-surface container
• a sign warning of overhead electrical danger
• height marks for containers higher than 2.6 m (8 ft 6 in)

See also

• Standard Carrier Alpha Code
• UIC wagon numbers

The following is a list of further freight container related ISO specifications, where not all have an article assigned yet (you can help improve Wikipedia and start one):

• ISO 668 - Freight containers - Classification, dimensions and ratings
• ISO 830 - Freight containers - Terminology
• ISO 1161 - Freight containers - Corner fittings - Specification
• ISO 1496 - Freight containers - Specification and testing
• ISO 2308 - Hooks for lifting freight containers of up to 30 tons capacity - Basic requirements
• ISO 3874 - Freight containers - Handling and securing
• ISO 8323 - Freight containers - Air/surface (intermodal) general purpose containers - Specification and tests
• ISO 9669 - Freight containers - Interface connections for tank containers
• ISO 9711 - Freight containers - Information related to containers on board vessels
• ISO 9897 - Container equipment data exchange (CEDEX)
• ISO 10368 - Freight thermal containers - Remote condition monitoring
• ISO 10374 - Freight containers - Automatic identification

References

• Bureau International des Containers: Containers BIC-Code (printed brochure)
• Container Numbering Guide

External links

• Bureau International des Containers (BIC)
• Intermodal Check Digit Calculator
• BIC Code Identifier
• Freight Container Check Digit Calculator (includes Java source code for download *Static Java Method does not convert "10" check digit to "0")
• ITCO technical questions
• List of owner codes (not the official BIC site)
• Online check digit calculator
• Russian maritime register of shipping - BIC representation
• Container numbers validator
• Get container dimensions and type by ISO code
• Cargo container validator ISO 6346 in Javascript
• Container number validation application

Intermodal containers
Overview	Containerization Intermodal freight transport Bureau International des Containers ISO 6346 (BIC code) Twenty-foot equivalent unit
Transport	Container ship Double-stack Flatcar Well car
Handling	Container terminal Container crane Reach stacker Rubber tyred gantry crane Sidelifter Straddle carrier Twistlock Container spreader
Types	Refrigerated container SECU Tank container
Other	The Box BBC Box Container (board game) Container Shipping Information Service Shipping container architecture Sun Modular Datacenter