Herne Windmill

Herne Windmill
Origin
Grid reference TR 185 665
Operator(s) Kent County Council
Year built 1789
Information
Purpose Corn mill
Type Smock mill
Storeys Three-storey smock
Base storeys Two-storey base
Smock sides Eight-sided
Number of sails Four
Type of sails Double Patent sails
Windshaft Cast iron
Winding Fantail
Fantail blades Six blades
Auxiliary power Steam engine
Oil engine
Electric motor since 1952
Number of pairs of millstones Three
Other information Originally built on a single-storey base, raised in 1858 to two storeys

Herne Windmill is a Grade I listed[1] smock mill in Herne, Kent, England, that was built in 1781.

History

Herne Windmill was built by John Holman in 1789 when he was working for Sweetlove, the Wingham millwright.[2] There are records of a windmill in Herne as early as 1405.[3] The mill replaced an earlier post mill that was standing in 1511 and was marked on Philip Symonson's map of 1596, John Speed's map of 1611, Robert Morden's map of 1695, Emanuel Bowen's map of 1736 and Andrews, Drury and Herbert's map of 1769. In 1858, the mill was raised, and a two-storey brick base built underneath it. A new iron worm was fitted in 1931, replacing the old wooden one.[2] In the 1930s, the mill was working on two sails only. Frank Wootton, the miller, sought the assistance of the Society for the Protection of Ancient Buildings (SPAB), and after Rex Wailes made a report on the mill, two sails from the Black Mill, Forncett End, Norfolk were fitted by Thomas Hunt of Soham, Cambridgeshire in 1936. A new pair of sails was constructed by Hunt, the work being made possible by support from SPAB, the Duchess of Kent and Trinity House. The latter assisted as the mill was marked as a navigational landmark for shipping. The mill worked by wind until 1952, assisted latterly by a steam engine, then an oil engine. After that date, milling was done with an electric motor supplying the power.[3] Milling continued with the electric motor until 1980.[4]

Description

For a description of the machinery, see Mill machinery.

Herne Mill has a three-storey smock on a two-storey brick base. It has four double patent sails carried on a cast-iron windshaft, housed in a Kentish-style cap. The mill is winded by a fantail. There is a stage at a level between the first and second floor.[2] The Brake Wheel is composite, with an iron centre and a wooden rim. It drives a wooden compass arm Wallower on a wooden Upright Shaft. This carries a wooden compass arm Great Spur Wheel. The mill drives three pairs of millstones overdrift.[5]

New sails were fitted in 2004. These measure 33 ft 3 3⁄4 in (10.15 m) long by 5 ft 10 3⁄4 in (1.80 m) wide each, with a total span of 68 feet 8 inches (20.93 m). The work was carried out by IJP Millwrights of Binfield Heath, Berkshire.[6]

Millers

References for above:-[2][3][7]

See also

References

  1. ↑ "HERNE WINDMILL, MILL LANE (north side), HERNE AND BROOMFIELD, CANTERBURY". English Heritage. Retrieved 2008-04-17.
  2. 1 2 3 4 Coles Finch, William (1933). Watermills and Windmills. London: C W Daniel Company. pp. 221–222.
  3. 1 2 3 West, Jenny (1973). The Windmills of Kent. London: Charles Skilton Ltd. pp. 46–49. ISBN 0-284-98534-1.
  4. ↑ "HERNE WINDMILL". Favonius. Retrieved 2008-04-16.
  5. ↑ Reynolds, John (1974). Windmills and Watermills (2nd ed.). London: Hugh Evelyn Ltd. p. 106. ISBN 0-238-78943-8.
  6. ↑ "PROJECT SUPERVISION for IJP Building Conservation Ltd at Herne windmill, Kent". Bonwick Milling Heritage Consultancy. Retrieved 2008-04-16.
  7. ↑ "Directory of Kent Mill People". The Mills Archive Trust. Retrieved 2008-04-16.
Wikimedia Commons has media related to Herne Windmill.

Coordinates: 51°21′19″N 1°8′13″E / 51.35528°N 1.13694°E / 51.35528; 1.13694

This article is issued from Wikipedia - version of the 5/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.