Exidy Sorcerer

Exidy Sorcerer

An Exidy Sorcerer
Manufacturer Exidy
Type Home computer
Release date 1978 (1978)
Retail availability 1978–1980
Introductory price US$895 (equivalent to $3,253 in 2015)
CPU Zilog Z80 @ 2.106 MHz (later 4 MHz)
Memory 4 Kb RAM (expandable to 48 kB. larger sizes came standard in later runs) / 4 kB ROM (cartridges could include 4 to 16 kB)
Display 64×30 character display, monochrome
Sound none (external additions possible)
Connectivity composite video, Centronics parallel, RS-232, sound in/out for cassette use, 50 pin ribbon connector including the S-100 bus.
Related articles Tulip

The Sorcerer is one of the early home computer systems, released in 1978 by the videogame company Exidy. It was comparatively advanced when released, especially when compared to the contemporary more commercially successful Commodore PET and TRS-80, but due to a number of problems, including a lack of marketing, the machine remained relatively unknown. Exidy eventually pulled it from the market in 1980, and today they are a coveted collector's item.

History

Origins

Having recently sold his share of the personal computer stores, the Byte Shop, Paul Terrell started looking for new ventures. He eventually convinced the founders of Exidy, H.R. "Pete" Kauffman and Howell Ivy, that there was a market opportunity for a truly simple computer with reasonable performance. At the time, the PET and TRS-80 offered the out-of-the-box experience he considered essential yet required a costly computer monitor notwithstanding their inadequate graphics. The Apple II, on the other hand, had superior graphics and color, but required some user assembly before being operational. Terrell's objective was a machine offering the best of both worlds.

The result was the Sorcerer. It was powered by a Zilog Z80 running at 2.106 MHz with 4 to 48 kilobytes of RAM, giving it performance parity with the TRS-80. In its basic form it consisted of a single chassis containing the computing hardware with the keyboard on top, a layout that became common with machines like the Atari 800 and Commodore VIC-20. In this form it could be attached to a 3rd party computer monitor and used with software loaded from the "ROM-PAC" cartridges and a cassette tape drive as a low-cost offering. For larger systems, the base unit could be attached to an external S-100 expansion chassis that sat behind the console, allowing cards to expand the system as well as offering floppy disk support.

Launch in the US

The Sorcerer made its debut at the Long Beach Computer Show in April 1978.

Pete Kauffman and Howell Ivy owned one of the leading coin-operated video game companies at the time and as Paul Terrell would put it “Their graphic designs with a computer were so good they would take quarters out of my pocket.” The personal computer marketplace was in dire need of a PC that exhibited good graphics capabilities, a fact not lost on Paul Terrell who had just sold his chain of 58 Byte Shop computer stores to John Peers of Logical Machine Corporation.

Paul convinced his friends Pete and Howell to design and build his dream computer, The Exidy Sorcerer. “Computers are like magic to people”, says Paul, “So let's give them computer magic with the Sorcerer computer” and hence the name. Paul also wanted a “consumer computer” that was user-friendly beyond anything currently in the marketplace. Early home computers, hobby computers, and personal computers were designed and manufactured for the technically savvy. The consumer electronics industry had not yet recognized home computing as a viable market and was only offering calculators and video game consoles.

As the VP of Engineering and partner in Exidy Inc. Howell was a natural computer enthusiast with a wealth of knowledge in computer graphic design and what excited consumers in computer graphics. He was also astute enough to realize that the current marketplace was principally made up of technical engineers, programmers and technicians that wanted more than just a video game in their home computer. With that, Howell set out to design the Exidy Sorcerer to be the most innovative Personal Computer in the marketplace. Exidy would be competing with the Apple II, Commodore Pet, and Tandy TRS 80.

The wish list of design improvements over the existing designs went like this:

The standard plug-in attachments to the keyboard case (included in the base price of the unit) were a printer port for hard copy devices, cassette port for mass storage, and serial port for communications. Some of these were included with the competing products and some were add-on.

The Exidy Sorcerer was competitively priced at $895 and went to market in Long Beach California in April 1978 and generated a 4,000 unit back-log on introduction.

Shipments did not start until later that summer.[1]

Exidy sold the rights to the design of the Exidy Sorcerer to Dynasty Computer Corp. of Dallas, Texas. They made minor updates and re-released it as the "Dynasty smart-ALEC".

Successes outside the US

Export of personal computers was complicated by the requirement of US Government State Department approval but this was more than offset by the financial advantage afforded by the customary export terms of sale under letter of credit, yielding immediate cash, as compared to chasing payments from domestic retailers on 30-day credit terms. Exidy was thus keen to concentrate on international sales though recognizing the importance of its US presence for development and marketing purposes.

Exidy took this to another level by licensing production both domestically and internationally, increasing total production and market penetration without calling on cash flow. With its unique programmable character set for foreign language characters, the Exidy Sorcerer was in a league of its own. Advance royalty payments and license fees made this business a priority for Exidy, Inc.

The first Sorcerers sold in the UK were imported direct from the US by a small company based in Cornwall called Liveport Ltd. Liveport also eventually designed and built extra plug-in ROM-PAC cartridges and an add-on floppy disk drive (based on Micropolis units) that did not require the expensive S-100 chassis. Sorcerer sales in continental Europe were fairly strong, via their distributor, CompuData Systems. The machine had its greatest success in 1979 when the Dutch broadcasting company TELEAC, in a move to be emulated later by the BBC with its BBC Micro, decided to introduce its own home computer. The Belgian company DAI was originally contracted to design the machine but they failed to deliver and CompuData delivered several thousand Sorcerers instead.

Sales in Europe were strong and, when the Dutch Government endorsed computers for small business, CompuData decided to license the Exidy design for local construction in the Netherlands with government support. After several years of Exidy production, CompuData developed their own 16-bit Intel 8088–based machine called the Tulip, replacing the Sorcerer in 1983. One of the largest computing user groups in the Netherlands was the ESGG (Exidy Sorcerer Gebruikers Groep) which published a monthly newsletter in two editions, Dutch and English. For some time, they were the largest group in the HCC (Hobby Computer Club) federation. The Dutch company De Broeders Montfort was a major firmware manufacturer.

The Sorcerer was successful in Australia as a result of strong promotion by its exclusive agent Dick Smith Electronics, though there was price resistance as it was considered beyond the means of most hobbyists. The Sorcerer Computer Users group of Australia (SCUA) actively supported the Sorcerer long after Exidy discontinued it, with RAM upgrades, speed boosts, the "80-column card", and even a replacement monitor program, SCUAMON.

The history of the Sorcerer has some parallels with Exidy's competitor Bally's attempts to build a home computer based on the Astrocade. In contrast to the Astrocade's (and Datamax UV-1's) limited text capabilities but excellent graphics, the Sorcerer had excellent text and only limited graphics.

Description

The Sorcerer was a combination of parts from a standard S-100 bus machine and its custom display circuitry. The machine included the Zilog Z80 and various bus features needed to run the CP/M operating system, but placed them inside a "closed" box with a built-in keyboard similar to machines like the Commodore PET, the Commodore 64, and the Atari 8-bit family. Unlike those machines, the Sorcerer's keyboard was a high quality unit with full "throw". The keyboard included a custom "Graphics" key, which allowed easy entry of the extended character set, without having to overwork the Control key, the more common solution on other machines. Leading its peers, the Sorcerer included lower-case characters as a standard feature.

Unlike most S-100 CP/M machines of its era, the Sorcerer did not have any internal expansion slots, and everything that was needed for basic computing was built-in. A standard video monitor was required for display, and optionally a standard audio cassette deck was needed for data storage. The Sorcerer included a small ROM containing a simple monitor program which allowed the machine to be controlled at the machine language level, as well as load programs from cassette tape or cartridges. The cartridges, known as "ROM PAC"s in Exidy-speak, were built by replacing the internal tape in an eight-track tape case with a circuit board and edge connector to interface with the Sorcerer.

The machine was usable without any expansion, but if the user wished to use S-100 cards they could do so with an external expansion chassis. This was connected to the back of the machine through a 50-pin connector. Using the expansion chassis the user could directly support floppy disks, and boot from them into CP/M (without which the disks were not operable). Another expansion option was a large external cage which included a full set of S-100 slots, allowing the Sorcerer to be used like a "full" S-100 machine. Still another option combined the floppies, expansion chassis and a small monitor into a single large-ish box.

Graphics on the Sorcerer sound impressive, with a resolution of 512×240, when most machines of the era supported a maximum of 320×200. These lower resolutions were a side effect of the inability of the video hardware to read the screen data from RAM fast enough; given the slow speed of the machines they would end up spending all of their time driving the display. The key to building a usable system was to reduce the total amount of data, either by reducing the resolution, or by reducing the number of colors.

The Sorcerer instead chose another method entirely, which was to use definable character graphics. There were 256 characters possible for each screen location. The lower half was fixed in ROM, and contained the usual ASCII character set. The upper half was defined in RAM. This area would be loaded with a default set of graphics at reset, but could be re-defined and used in lieu of pixel-addressable graphics. In fact the machine was actually drawing a 64×30 display (8×8 characters) which was well within the capabilities of the hardware. However this meant that all graphics had to lie within a checkerboard pattern on the screen, and the system was generally less flexible than machines with "real" graphics. In addition, the high resolution was well beyond the capability of the average color TV, a problem they solved by not supporting color. In this respect the Sorcerer was similar to the PET and TRS-80 in that it had only "graphics characters" to draw with, but at least on the Sorcerer one could define a custom set. It was also possible to provide animation by character replacement or by redefining the character bitmap.

Given these limitations, the quality of the graphics on the Sorcerer was otherwise excellent. Clever use of several characters for each graphic allowed programmers to create smooth motion on the screen, regardless of the character-cell boundaries. A more surprising limitation, given the machine's genesis, is the lack of sound output. Enterprising developers then standardized on use of two pins of the parallel port, to which users were expected to attach a speaker.

A Standard BASIC cartridge was included with the machine. This cartridge was essentially the common Microsoft BASIC already widely used in the CP/M world. One modification was the addition of single-stroke replacements for common BASIC commands, pressing GRAPHICS-P would insert the word PRINT for instance, allowing for higher-speed entry. The machine included sound in/out ports on the back that could be attached to a cassette tape recorder, so BASIC could load and save programs to tape without needing a disk drive. An Extended BASIC cartridge requiring 16 KB was also advertised, but it is unclear if this was actually available; Extended BASIC from Microsoft was available on cassette. Another popular cartridge was the Word Processor PAC which contained a version of the early word processor program Spellbinder. A constant ROM fault in the wordprocessor PAC was a printer status switch setting for the printer, but most people learned about it and turned it off early in their power-on.

The Montfort Brothers made an EPROM PAC with a rechargeable battery inside and 16 kB RAM with an external write-protect switch. Thus bootable software could be uploaded to the pack and kept for a longer period.

Many CP/M machines were designed to allow the full 16-bit address space of 64 kB to be populated by memory. This was problematic on the Exidy Sorcerer. 32 kB could easily be populated. Another 16 kB was the ROM cartridge address space. This could be populated, but required disabling the ROM cartridge capability. The last 16 kB was required by the system for I/O, particularly for the video, and would have required extensive system modification.

References

  1. ↑ Ken Barbier, "The Boredom Destroyer: Exidy's Sorcerer", Creative Computing, January 1979
Wikimedia Commons has media related to Exidy Sorcerer.
This article is issued from Wikipedia - version of the 9/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.