EMC E1

EMC E1

A 1938 publicity photo of Santa Fe's Golden Gate passenger train pulled by an E1
Type and origin
Power type Diesel-electric
Builder Electro-Motive Corporation (EMC)
Build date 1937–1938
Total produced 8 A units, 3 B units
Specifications
AAR wheel arr. A1A-A1A
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Prime mover Winton 201-A, 2 off
Performance figures
Power output 1,800 hp (1,300 kW)
Career
Operators Atchison, Topeka and Santa Fe Railway
Numbers 2–9 (A units), 2A–4A (B units)

The EMC E1 was an early passenger-train diesel locomotive developing 1,800 hp, with an A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation of La Grange, Illinois. They were built during 1937 and 1938 for the Atchison, Topeka and Santa Fe Railway for a new generation of diesel-powered streamlined trains. 8 cab-equipped lead A units and three cabless booster B units were built. The initial three locomotives were AB pairs built to haul the Santa Fe's Super Chief diesel streamliners, while the others were built as single A units to haul shorter trains. The locomotives were diesel-electrics with two 900 hp (670 kW) Winton 201-A engines each, with each engine driving its own generator to power the traction motors. The E1 was the second model in a long line of passenger diesels of similar design known as EMD E-units. All Winton 201A-engined Santa Fe passenger units, including the E1s, were extensively rebuilt into the 80-class E8M engines in 1952-53. These were similar to production E8 models, but derated to 2000 hp so as not to burn out the early traction (axle) motors (which were reused).

Significance and influence

The E1—along with the more-or-less simultaneous EA/EB for the Baltimore and Ohio Railroad, the E2 for the Union Pacific Railroad, Chicago and North Western Railway and Southern Pacific Railroad, and the TA for the Chicago, Rock Island and Pacific Railroad—represented an important step in the evolution of the passenger diesel locomotive. While the EA, E1, E2 and TA were each built for a specific railroad, they were largely identical mechanically (though the TA utilized a single Winton 201-A diesel of sixteen cylinders, and produced only 1200 horsepower), and were a step further away from the custom-built, integrated streamliner and towards mass-produced passenger locomotives—a step achieved with the E3, EMD's next models.

Styling

The EA/EB and E1 featured largely identical and innovative styling showing the influence of the Electro-Motive Corporation's new buyer General Motors. While mechanically they had much in common with previous, experimental EMC locomotives, GM understood the importance of looking new and exciting, not merely being technically innovative. This basic "slant nose" style was continued in the subsequent E3, E4, E5 and E6 models, while a more "bulldog nose" style was tried in the E2 and a style somewhere in between was used for the E7, E8 and E9, as well as the freight diesel cab units. It could fairly be said that the overall styling influenced passenger locomotives around the world. The "shovelnose" styling was modified on later models because the streamlined headlight was found less satisfactory than more common types with vertical lenses, and the elegantly sloped nose had a bad habit of deflecting vehicles up toward the cab in a grade crossing collision. More enduring was the paint scheme—E1 number two and her booster #2A were the first locomotives to wear the world-famous Santa Fe "Warbonnet" red and silver colors. In fact, these units used stainless steel sides on the carbody to better match the road's new stainless passenger cars. Interestingly, this decor was not developed by the Santa Fe, but by EMC—or rather, by GM's Art and Color section.

Numbers and assignments

Each E1 was initially ordered for and assigned to a particular train. The ATSF practice was to give all locomotive units in a set the same number, distinguished by letter. The lead unit was designated 'L', but this was not carried on its numberboards. The second unit was 'A'; subsequent units were 'B', 'C', if present. This numbering was part of the railroads' ultimately successful campaign to convince the railroad unions that a multiple-unit diesel locomotive should be considered one locomotive of several parts (and thus needing only one crew) rather than multiple locomotives requiring multiple crews under union agreements.

About a month before inaugurating Golden Gate service, units eight and nine inaugurated the Chicagoan/Kansas Cityan streamlined coach trains. After the publicity photos and promotional runs had been done with these handsome units, these services were taken over by a strange-looking pair, the mechanically similar, heavily rebuilt numbers 1 and 10 (the latter being the former 1A) of 1935. Soon, additional equipment from the Budd Company allowed the Santa Fe to enlarge the wildly successful El Capitan beyond the original pair of five car consists. The 4/4A set, which originally sat around "protecting" the Super Chief, was pressed into regular service, and units five and six were combined to form one lashup. This provided four 3600 horsepower lashups to serve these four trainsets in transcontinental service, providing twice-weekly service for both trains.

With the delivery of EMC E3, E6 and ALCO DL-107 and DL-108 units in 1940-41, the E1 units were less often used on the Super Chief and El Capitan. Instead they doubled up on the other trains as their consists were expanded, and occasionally handled the normally steam-powered Chief. In 1947, all the Santa Fe's E-series EMD locomotives were pulled from transcontinental service, and used on a variety of other services where the grades were not as severe. These units and the similarly-powered 1 and 1A were rebuilt by EMD as E8M locomotives, eliminating the unreliable 201-A diesels. The first few units rebuilt retained their original numbers for a time, but as unit 1 was rebuilt as a booster, the group was renumbered 80-87 (cab units) and 80A-84A (boosters). Unit 3, as unit 82, was destroyed in a wreck near Hardin, Missouri in August 1959 and scrapped. The other units were sold in 1971.

See also

References

  • Lamb, J. Parker (2007). Evolution of the American Diesel Locomotive. Railroads Past and Present. Bloomington, IN, USA: Indiana University Press. ISBN 9780253348630. 
  • Marre, Louis A. (1995). Diesel Locomotives: The First 50 Years: A Guide to Diesels Built Before 1972. Railroad Reference Series (Book 10). Waukesha, WI, USA: Kalmbach Publishing. ISBN 0890242585. 
  • Pinkepank, Jerry A. (1973). The Second Diesel Spotter’s Guide. Milwaukee, WI: Kalmbach Publishing Company. ISBN 0-89024-026-4. 
  • Schafer, Mike (1998). Vintage Diesel Locomotives. Enthusiast Color Series. Osceola, WI, USA: MBI Publishing. ISBN 0760305072. 
  • Solomon, Brian (2000). The American Diesel Locomotive. Osceola, WI, USA: MBI Publishing. pp. 53–56, 63, 65, 67, 68, 70. ISBN 0760306664. 
  • Solomon, Brian (2006). EMD Locomotives. St. Paul, MN: Voyageur Press. ISBN 978-0-7603-2396-0. 
  • Solomon, Brian (2010). Vintage Diesel Power. Minneapolis, MN, USA: MBI Publishing. ISBN 9780760337950. 
  • Solomon, Brian (2011). Electro-Motive E-Units and F-Units: The Illustrated History of North America's Favorite Locomotives. Minneapolis, MN, USA: Voyageur Press. ISBN 9780760340073. 
  • Solomon, Brian (2012). North American Locomotives: A Railroad-by-Railroad Photohistory. Minneapolis, MN, USA: Voyageur Press. ISBN 9780760343708. 
  • Wilson, Jeff (2002). E Units: Electro-Motive's Classic Streamliners. Classic Trains / Golden Years of Railroading series. Waukesha, WI, USA: Kalmbach Publishing. ISBN 0890246068. 
Wikimedia Commons has media related to EMC E1 locomotives.
This article is issued from Wikipedia - version of the 10/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.