Dinitrogen pentoxide
 | |
 | |
| Names | |
|---|---|
| IUPAC name
Dinitrogen pentaoxide | |
| Other names
Nitric anhydride Nitronium nitrate Nitryl nitrate DNPO Anhydrous nitric acid | |
| Identifiers | |
10102-03-1  | |
| 3D model (Jmol) | Interactive image |
| ChEBI | CHEBI:29802 |
| ChemSpider | 59627 |
| ECHA InfoCard | 100.030.227 |
| EC Number | 233-264-2 |
| PubChem | 66242 |
| UNII | 6XB659ZX2W  |
| |
| |
| Properties | |
| N2O5 | |
| Molar mass | 108.01 g/mol |
| Appearance | white solid |
| Density | 1.642 g/cm3 (18 °C) |
| Melting point | 41 °C (106 °F; 314 K) [1] |
| Boiling point | 47 °C (117 °F; 320 K) sublimes |
| reacts to give HNO3 | |
| Solubility | soluble in chloroform negligible in CCl4 |
| 1.39 D | |
| Structure | |
| hexagonal | |
| planar, C2v (approx. D2h) N–O–N ≈ 180° | |
| Thermochemistry | |
| Std molar entropy (S |
178.2 J K−1 mol−1 (s) 355.6 J K−1 mol−1 (g) |
| Std enthalpy of formation (ΔfH |
−43.1 kJ/mol (s) +11.3 kJ/mol (g) |
| Gibbs free energy (ΔfG˚) |
114.1 kJ/mol |
| Hazards | |
| Main hazards | strong oxidizer, forms strong acid in contact with water |
| NFPA 704 | |
| Flash point | Non-flammable |
| Related compounds | |
| Nitrous oxide Nitric oxide Dinitrogen trioxide Nitrogen dioxide Dinitrogen tetroxide | |
| Related compounds |
Nitric acid |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| verify (what is ?) | |
| Infobox references | |
Dinitrogen pentoxide is the chemical compound with the formula N2O5. Also known as nitrogen pentoxide, N2O5 is one of the binary nitrogen oxides, a family of compounds that only contain nitrogen and oxygen. It is an unstable and potentially dangerous oxidizer that once was used as a reagent when dissolved in chloroform for nitrations but has largely been superseded by NO2BF4 (nitronium tetrafluoroborate).
N2O5 is a rare example of a compound that adopts two structures depending on the conditions: most commonly it is a salt, but under some conditions it is a polar molecule:
- [NO2+][NO3−] ⇌ N2O5
Syntheses and properties
N2O5 was first reported by Deville in 1840, who prepared it by treating AgNO3 with Cl2.[2][3] A recommended laboratory synthesis entails dehydrating nitric acid (HNO3) with phosphorus(V) oxide:[4]
- P4O10 + 12 HNO3 → 4 H3PO4 + 6 N2O5
In the reverse process, N2O5 reacts with water (hydrolyses) to produce nitric acid. Thus, dinitrogen pentoxide is the anhydride of nitric acid:
- N2O5 + H2O → 2 HNO3
N2O5 exists as colourless crystals that sublime slightly above room temperature. The salt eventually decomposes at room temperature into NO2 and O2. [5]
Structure
2O
5
Solid N2O5 is a salt, consisting of separated anions and cations. The cation is the linear nitronium ion NO2+ and the anion is the planar nitrate NO3− ion. Thus, the solid could be called nitronium nitrate. Both nitrogen centers have oxidation state +5.
The intact molecule O2N–O–NO2 exists in the gas phase (obtained by subliming N2O5) and when the solid is extracted into nonpolar solvents such as CCl4. In the gas phase, the O–N–O angle is 133° and the N–O–N angle is 114°. When gaseous N2O5 is cooled rapidly ("quenched"), one can obtain the metastable molecular form, which exothermically converts to the ionic form above −70 °C.[4]
Reactions and applications
Dinitrogen pentoxide, for example as a solution in chloroform, has been used as a reagent to introduce the NO2 functionality. This nitration reaction is represented as follows:
- N2O5 + Ar–H → HNO3 + Ar–NO2
where Ar represents an arene moiety.
N2O5 is of interest for the preparation of explosives.[3][6]
In the atmosphere, dinitrogen pentoxide is an important reservoir of the NOx species that are responsible for ozone depletion: its formation provides a null cycle with which NO and NO2 are temporarily held in an unreactive state.
NO2BF4
Replacement of the NO3− portion of N2O5 with BF4− gives nitronium tetrafluoroborate (NO2BF4, CAS#13826-86-3). This salt retains the high reactivity of NO2+, but it is thermally stable, decomposing at ca. 180 °C (into NO2F and BF3). NO2BF4 has been used to nitrate a variety of organic compounds, especially arenes and heterocycles. The reactivity of the NO2+ can be further enhanced with strong acids that generate the "super-electrophile" HNO22+.
Hazards
N2O5 is a strong oxidizer that forms explosive mixtures with organic compounds and ammonium salts. The decomposition of dinitrogen pentoxide produces the highly toxic nitrogen dioxide gas.
References
- ↑ Emeleus (1 January 1964). Advances in Inorganic Chemistry. Academic Press. pp. 77–. ISBN 978-0-12-023606-0. Retrieved 20 September 2011.
- ↑ M.H. Deville (1849). "Note sur la production de l'acide nitrique anhydre". Compt. Rend. 28: 257–260.
- 1 2 Jai Prakash Agrawal (19 April 2010). High Energy Materials: Propellants, Explosives and Pyrotechnics. Wiley-VCH. pp. 117–. ISBN 978-3-527-32610-5. Retrieved 20 September 2011.
- 1 2 Holleman, A. F.; Wiberg, E. (2001), Inorganic Chemistry, San Diego: Academic Press, ISBN 0-12-352651-5
- ↑ Nitrogen(V) Oxide. Inorganic Syntheses. 3. 1950. pp. 78–81.
- ↑ Talawar, M. B.; et al. (2005). "Establishment of Process Technology for the Manufacture of Dinitrogen Pentoxide and its Utility for the Synthesis of Most Powerful Explosive of Today—CL-20". Journal of Hazardous Materials. 124: 153–64. doi:10.1016/j.jhazmat.2005.04.021.