Coupled mode theory

Coupled mode theory (CMT) is a perturbational approach for analyzing the coupling of vibrational systems (mechanical, optical, electrical, etc.) in space or in time. Coupled mode theory allows a wide range of devices and systems to be modeled as one or more coupled resonators. In optics, such systems include laser cavities, photonic crystal slabs, metamaterials, and ring resonators.

History

Coupled mode theory first arose in the 1950s in the works of Miller on microwave transmission lines,[1] Pierce on electron beams,[2] and Gould on backward wave oscillators.[3] This put in place the mathematical foundations for the modern formulation.[4]

In the late 1990s and early 2000s, the field of nanophotonics has revitalized interest in coupled mode theory. Coupled mode theory has been used to account for the fano resonances in photonic crystal slabs[5] and has also been modified to account for optical resonators with non-orthogonal modes.[6]

Overview

The oscillatory systems to which coupled mode theory applies are described by second order partial differential equations (e.g. a mass on a spring, an RLC circuit). CMT allows the second order differential equation to be expressed as one or more uncoupled first order differential equations. The following assumptions are generally made with CMT:

Formulation

The formulation of the coupled mode theory is based on the development of the solution to an electromagnetic problem into modes. Most of the time it is eigenmodes which are taken in order to form a complete base. The choice of the base and the adoption of certain hypothesis like parabolic approximation differs from formulation to formulation. The classification proposed by [7] of the different formulation is as follows:

  1. The choice of starting differential equation. some of the coupled mode theories are derived directly from the Maxwell differential equations [8][9] (here) although others use simplifications in order to obtain an Helmholtz equation.
  2. The choice of principle to derive the equations of the CMT. Either the reciprocity theorem [8][9] or the variational principle have been used.
  3. The choice of orthogonality product used to establish the eigenmode base. Some references use the unconjugated form [8] and others the complex-conjugated form.[9]
  4. Finally, the choice of the form of the equation, either vectorial [8][9] or scalar.

When n modes of an electromagnetic wave propagate through a media in the direction z without loss the power transported by each mode is described by a modal power Pm. At a given frequency ω.

where is the norm of the mth mode and is the modal amplitude.

References

  1. ↑ S.E.Miller,"Coupled wave theory and waveguide applications.",Bell Syst.Tech. J.,1954
  2. ↑ J.R. Pierce, "Coupling of modes of propagations", Journal of Applied Physics, 25, 1954
  3. ↑ R.W. Gould, "A coupled mode description of the backward-wave oscillator and the Kompfner dip condition" I.R.E. Trans. Electron Devices, vol. PGED-2, pp. 37-42, 1955.
  4. ↑ H.A. Haus, W.P. Huang. "Coupled Mode Theory."Proceedings of The IEEE, Vol 19, No 10, Oct 1991.
  5. ↑ S. Fan, W. Suh, J. Joannopoulos, "Temporal coupled-mode theory for the Fano resonance in optical resonators," JOSA A, vol. 20, no. 3, pp. 569–572, 2003.
  6. ↑ W. Suh, Z. Wang, and S. Fan, "Temporal coupled-mode theory and the presence of non-orthogonal modes in lossless multimode cavities," Quantum Electronics, IEEE Journal of, vol. 40, no. 10, pp. 1511–1518, 2004
  7. ↑ Barybin and Dmitriev,"Modern Electrodynamics and Coupled-mode theory",2002
  8. 1 2 3 4 Hardy and Streifer, "Coupled mode theory of parallel waveguides", Journal of Lightwave Technology,1985
  9. 1 2 3 4 A. W. Snyder and J. D. Love, "Optical waveguide Theory",Chapman and Hall, 1983

External links

This article is issued from Wikipedia - version of the 9/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.