Bell 427

Bell 427
Role Multipurpose utility helicopter
National origin United States / Canada
Manufacturer Bell Helicopter
Samsung Aerospace Industries (later part of Korea Aerospace Industries)
First flight December 11, 1997
Introduction 2000
Status In service
Produced 1997-2010
Developed from Bell 407
Developed into Bell 429

The Bell 427 is a twin engine, multirole, light utility helicopter designed and manufactured by Bell Helicopter and Samsung Aerospace Industries. Its design is based on Bell 407. It has been replaced in production by the lengthened Bell 429.

Development

Bell has tried several incarnations of a twin version of its successful Bell 206 series, including the stillborn Bell 400 and 440 in the mid-1980s, and the limited production Bell 206LT TwinRanger in the early 1990s.[1] Bell's original concept for a replacement for the 206LT TwinRanger was the Bell 407T, a relatively straightforward twin-engine development of the Bell 407 with two Allison 250-C22B engines. However, Bell concluded that the payload-range performance of the 407T would not be sufficient.[2]

The company began development of a new light twin, in partnership with South Korea's Samsung Aerospace Industries. In February 1996, Bell announced its Model 427 at the Heli Expo in Dallas. The Bell 427 was the company's first aircraft designed entirely on computer.[2] The Bell 427 first flew on December 11, 1997. Canadian certification was awarded on November 19, 1999, followed by US certification in January 2000, and US FAA dual pilot IFR certification in May 2000. Bell builds the 427's flight dynamics systems at Fort Worth, Texas, while final assembly is performed at Bell's Mirabel, Quebec facility. The 427's fuselage and tailboom are built by Samsung (later part of KAI) at its Sachon plant in South Korea.[2] The first customer deliveries occurred in January 2000.[3]

In 2004, Bell offered a redesigned 427 version, the Bell 427i, which was developed in partnership with South Korea's Korea Aerospace Industries and Japan's Mitsui Bussan Aerospace. The agreement gave KAI the development and production responsibility for the fuselage, cabin wiring, and fuel system. Mitsui Bussan became a financial backer.[4][5] The 427i included a newer glass cockpit and navigation systems to allow single pilot flying under Instrument flight rules. The design had a fuselage lengthened 1 ft 2 in (0.36 m), a more powerful engine version and transmission, and increased takeoff weight. However, the program was canceled and focus shifted to the improved Bell 429.[6] In February 2005, the existing 80 orders for the 427i were converted to the 429.[7] On January 24, 2008, Bell announced plans to officially discontinue its 427 line after current order commitments are fulfilled in 2010.[8]

Design

Bell 427 cockpit

The Bell 427 is powered by two Pratt & Whitney Canada PW207D turboshaft engines with FADEC.[2] Like the Bell 407, the 427 uses a 4-blade main rotor system with a rigid, composite rotor hub and a 2-blade tail rotor.[2]

The Bell 427's cabin is 13 in (33 cm) longer than the 407, and primarily consists of composite construction. The cabin lacks the roof beam which obstructs the cabin on the 206/206L/407, and has an optional sliding main cabin door.[2]

The 427 offers 8-place seating including pilot in a 2+3+3 arrangement. Alternate layouts include four in the main cabin in a club configuration, or two stretchers and two medical attendants for medical evacuation duties.[2]

Operators

Specifications (Bell 427)

Data from Bell Helicopter,[12][13] International Directory of Civil Aircraft,[2] Aerospace-Technology[14]

General characteristics

Performance

See also

Related development
Aircraft of comparable role, configuration and era

References

  1. ↑ Frawley, Gerard. The International Directory of Civil Aircraft, 2003-2004, p. 43. Aerospace Publications Pty Ltd, 2003. ISBN 1-875671-58-7.
  2. 1 2 3 4 5 6 7 8 Frawley, Gerard. The International Directory of Civil Aircraft, 2003-2004, p. 47. Aerospace Publications Pty Ltd, 2003. ISBN 1-875671-58-7.
  3. ↑ Bell 427 page Archived June 16, 2007, at the Wayback Machine.. Flug Revue, March 21, 2001.
  4. ↑ "Bell Developing 427i with KAI" Archived July 20, 2011, at the Wayback Machine.. vtol.org, July 2004.
  5. ↑ Healey, Andrew. "Bell’s new 427i promises much more than just IFR" Archived June 16, 2011, at the Wayback Machine.. Aviation International News online, September 1, 2004.
  6. ↑ Jane's All the World's Aircraft, Jane's Information Group, 2009. subscription article, dated April 17, 2009.
  7. ↑ "HeliExpo '05: All Bell 427i Customers Convert to New Bell 429". aero-news.net, February 7, 2005
  8. ↑ "Bell Streamlines Product Line to Better Align with Customer Demands" Archived December 30, 2010, at the Wayback Machine.. Bell Helicopter, 24 January 2008.
  9. ↑ "Bell 427. Nuevo Helicóptero para la Policía de Entre Rios". aeroforo.com. Retrieved 2 February 2013.
  10. ↑ "Policia de la Provincia de Entre Rios Bell 427". Demand media. Retrieved 2 February 2013.
  11. ↑ "Alfa Heli fleet". alfahelicopter.cz. Retrieved 2 February 2013.
  12. ↑ Bell 427 specifications Archived October 1, 2009, at the Wayback Machine.. Bell Helicopter
  13. 1 2 Bell 427 Product specifications Archived November 18, 2008, at the Wayback Machine.. Bell Helicopter, January 2006.
  14. ↑ Bell 427 Multipurpose Utility Helicopter, USA. Aerospace-Technology.

External links

Wikimedia Commons has media related to Bell 427.
This article is issued from Wikipedia - version of the 11/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.