BMW R27

BMW R27

1964 BMW R27
Manufacturer	BMW
Production	1960–1966 15,364 made
Assembly	Milbertshofen, Munich, West Germany
Predecessor	BMW R26
Class	Standard
Engine	OHV single
Bore / stroke	68 mm × 68 mm (2.7 in × 2.7 in)
Compression ratio	8.2:1
Top speed	130 km/h (81 mph)
Power	13 kW (17 hp) @ 7400 rpm
Transmission	Four-speed, left foot shift
Suspension	Front: Earles fork Rear: Swingarm, two coil spring / shock absorber units
Tires	3.25 x 18 front and rear
Wheelbase	1,379 mm (54.3 in)
Weight	162 kg (357 lb) (wet)
Fuel capacity	15 L (3.3 imp gal; 4.0 US gal)
Oil capacity	1.2 L (0.26 imp gal; 0.32 US gal)

The 247 cc BMW R27, introduced in 1960, is a shaft-driven, single-cylinder motorcycle manufactured by BMW.

History

1954 R25/3 — R27 and R60/2 in the background.

After World War II, the Potsdam Agreement of the USSR, USA, and the UK, prohibited BMW Aktiengesellschaft (AG) from building motorcycles. Later, this ban was lifted and in 1948 BMW produced its first postwar motorcycle, the 250 cc R24, which was based largely on the prewar R23. It was the only postwar BMW motorcycle produced without a rear suspension. BMW introduced the R25 model, with plunger rear suspension, in 1950. The last of the plunger models, the R25/3, was introduced in 1953.

R26

1959 BMW R26

1960 BMW R26

In 1956 BMW introduced a completely revamped thumper, the R26 (engine numbers 340 001 – 370 236), with improvements paralleling those introduced at the same time in the boxer twins. The R26 came with an enclosed drive shaft, rear swingarm, and front Earles forks. A new headlight nacelle came with a sliding black plastic over the ignition key, and the “bell-bottom” front fender was dropped along with the mechanics' hand shifter. The engine of the R26 was bolted directly to the frame, and produced 15 hp (11 kW).

R27

Dover white BMW R27

Based largely on the R26, in 1960 the R27 added rubber mounts for the engine and boosted power to 18 hp (13 kW). The 250 cc OHV vertical single was the only rubber-mounted thumper engine BMW ever produced, and was their last shaft drive single-cylinder motorcycle. The engine pumped out 18 hp (13 kW), the highest ever for a shaft-drive BMW single. BMW manufactured 15,364 R27 models (engine numbers 372 001 – 387 566 ) over the production years of 1960 to 1966. Some of the 1966 R27 models were sold as 1967 models because dealers in those years often would assign dates to BMW motorcycles when they sold them, and not necessarily when they were manufactured.^[1]

BMW did things differently from other manufacturers. This is evident in the R27. Its enclosed shaft final drive is rare for a single cylinder motorcycle. But it also had a triangulated Earles front fork (named after English designer Ernest Earles); so the motorcycle had a front swingarm as well as a rear swingarm. When you squeezed the front brake lever hard not only did the front end not dive, it actually rose slightly. Thus, braking was a very steady activity, though the brakes were weak by today's standards. The engine's crankshaft was laid out fore-and-aft rather than side-to-side; also a rare feature. This way, the crank and the final shaft were in line, and drive forces did not have to be run through a set of 90-degree gears. Also, the kick starter swung out sideways instead of parallel to the frame.

Technical data

R27 engine

See also

• History of BMW motorcycles

Further reading

• Helmut Krackowizer (1999), Schrader Motor-Chronik, Bd.11, BMW Motorräder Einzylinder R 24 bis R 27 1949-67 (in German), Motorbuch Verlag 
• Erwin Tragatsch, Alle Motorräder (in German), ISBN 3-87943-410-7 
• Motorrad (in German), March 1988  Missing or empty |title= (help)
• Hans-Joachim Mai (1988), 1000 Tricks für schnelle BMWs [1,000 tricks for fast BMWs] (in German) (11 ed.), Stuttgart: Motorbuch-Verlag, ISBN 978-3613011175 
• Ernst Leverkus, Die tollen Motorräder der 60er Jahre (in German) 

References

External links

Wikimedia Commons has media related to BMW R27.

• BMW Einzylinder-Zentrum