ARA Buenos Aires (1895)

For other ships with the same name, see ARA Buenos Aires.
History
Argentina
Name: ARA Buenos Aires
Builder: Armstrong, Mitchell and Co., Elswick
Laid down: February 1893
Launched: 10 May 1895
Completed: February 1896
Struck: 17 May 1932
General characteristics
Type: Protected cruiser
Displacement: 4,788 long tons (4,865 t)
Length:

396 ft (121 m) pp

424 ft (129 m) oa
Beam: 46 ft 6 in (14.17 m)
Draught: 17 ft 4 in (5.28 m)
Propulsion:
  • Two vertical triple expansion steam engines
  • 8 cylindrical boilers
  • 2 shafts
Speed: 23.2 kn (26.7 mph; 43.0 km/h)
Complement: 400
Armament:
  • 2× 8 in (203 mm)/45 guns (2×1)
  • 4× 6 in (152 mm)/45 QF guns (4×1)
  • 6× 4.7 mm (0 in)/45 QF guns (6×1)
  • 16× 3-pounder (47 mm) guns
  • 6× QF 1-pounder pom-pom
Armour:
  • Deck:5–1 1⁄2 in (127–38 mm)
  • Gunshields:4 1⁄2 in (110 mm)
  • Conning tower:6 in (152 mm)

ARA Buenos Aires[lower-alpha 1] was a protected cruiser of the Argentine Navy. It was built by the British shipyard of Armstrong Mitchell and Co, being launched in 1895 and completing in 1896. Buenos Aires continued in use until 1932.

Construction

In February 1893, Armstrong and Mitchell laid down a protected cruiser (Yard No. 612) at its Elswick, Newcastle upon Tyne shipyard as a stock ship (i.e. without an order from a customer).[2] The ship soon found a buyer, with Argentina, involved in dispute with Chile over the border between the two nations in Patagonia, purchasing the ship on 27 November 1893, and named it Buenos Aires.[2][3]

Buenos Aires was launched on 10 May 1895,[2] and underwent steaming trials on 2 November 1895, reaching an average speed of 23.202 knots (26.700 mph; 42.970 km/h) over a period of six hours with natural draught,[4] with gunnery trials following on 29 November that year.[5] The ship was completed in February 1896,[6] and reaching Argentina on 29 April 1896.[7]

Design

Buenos Aires was of similar design to the Chilean cruiser Blanco Encalada, the previous protected cruiser built by Armstrong and Mitchell, but with a modified armament.[2] Buenos Aires's hull had an overall length of 424 feet (129 m), and a length between perpendiculars of 396 feet (121 m). It had a beam of 46 feet 6 inches (14.17 m) and a draught of 17 feet 4 inches (5.28 m).[2] Like Blanco Encalada, Buenos Aires had a flush deck layout, and its hull was wood and copper sheathed to reduce fouling. The ship displaced 4,788 long tons (4,865 t).[8][9]

The ship was powered by two 4-cylinder triple-expansion steam engines fed by eight horizontal return tube boilers and driving two propeller shafts.[5][6] This machinery was designed to give 12,500 indicated horsepower (9,300 kW) with natural draught and 17,000 indicated horsepower (13,000 kW) under forced draught, but managed to generate 14,000 indicated horsepower (10,000 kW) under natural draught during trials.[2]

The ship's main armament consisted of two 8 inch (203 mm) /45 calibre guns (compared to the 40 calibre guns fitted to Blanco Encalada), mounted fore and aft behind shields on the ship's centreline.[2] These guns could fire 210 pounds (95 kg) or 250 pounds (113 kg) shells at a velocity of 2,650 feet per second (810 m/s) and 2,480 feet per second (760 m/s) respectively at a rate of fire of up to four rounds per gun per minute.[10] Secondary armament consisted of a mixed battery of four 6 inch (152 mm) /45 calibre and six 4.7 inch (120 mm) /45 calibre quick-firing guns,[2] (compared to the ten 6 inch /40 calibre guns mounted on Blanco Encalada) which could fire 100 pounds (45 kg) and 45 pounds (20 kg) shells at a rate of 7 rounds per minute and 10 rounds per minute respectively.[10] Tertiary armament consisted of sixteen three-pounder (47 mm) guns, while six QF 1-pounder pom-pom automatic guns were mounted on the ship's fighting tops. Five 18 inch torpedo tubes were fitted, one fixed in the box and four on the ship's broadside.[2][11]

As a protected cruiser, the ship's main protective armour was a sloping armoured deck of steel, with thickness of between 5 inches (130 mm) and 1 1⁄2 inches (38 mm), with the ship's conning tower protected by 6 inches (150 mm) armour and the gunshields 4 1⁄2 inches (110 mm) thick.[2]

Operational history

After arriving in Argentina, Buenos Aires joined the 1st Division of the fleet. The ship settled into a routine of naval exercises, interspersed with use as a survey ship. In 1906, the ship returned to the United Kingdom for refurbishment of its armament,[12] while in 1911, it again returned to Britain to participate in the Fleet review at Spithead to celebrate the coronation of King George V.[7]

Buenos Aires was stricken on 17 May 1932,[7] and sold for scrapping in 1935.[12]

Notes and references

Notes

  1. ↑ ARA stands for Armada de la Republica Argentina.[1]

Citations

  1. ↑ "List of Acronyms Preceding the Name of a Ship". Corporation of Lower St. Lawrence Pilots. Retrieved 10 November 2013.
  2. 1 2 3 4 5 6 7 8 9 10 Brooke 1999, p. 82.
  3. ↑ Chesneau and Kolesnik 1979, p. 401.
  4. ↑ The Engineer 8 November 1895, p. 464.
  5. 1 2 The Engineer 13 December 1895, p. 593.
  6. 1 2 Chesneau and Kolesnik 1979, p.403.
  7. 1 2 3 Brooke 1999, p. 83.
  8. ↑ Brooke 1999, pp. 81–82.
  9. ↑ Chesneau and Kolesnik 1979, pp. 403, 412.
  10. 1 2 Brassey 1897, p. 384.
  11. ↑ The Engineer 31 July 1896, p. 106.
  12. 1 2 "Crucero Buenos Aires (1896)". Historia y Arqueologia Marítima. Retrieved 16 November 2013.

References

See also

Further reading

External links

This article is issued from Wikipedia - version of the 5/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.