1986 North Palm Springs earthquake

1986 North Palm Springs earthquake

Oceanside Los Angeles Bishop
Date	July 8, 1986
Origin time	09:20:44 UTC [1]
Magnitude	6.0 Mw [1]
Depth	10 km (6.2 mi) [1]
Epicenter	34°01′N 116°46′W / 34.02°N 116.76°W / 34.02; -116.76Coordinates: 34°01′N 116°46′W / 34.02°N 116.76°W / 34.02; -116.76 [1]
Type	Strike-slip
Areas affected	Coachella Valley Southern California United States
Total damage	$4.5–6 million [2][3]
Max. intensity	VII (Very strong) [3]
Peak acceleration	.778g [4]
Casualties	29–40 injured [2][3]

The 1986 North Palm Springs earthquake occurred on July 8 at 02:20:44 local time with a moment magnitude of 6.0 and a maximum Mercalli Intensity of VII (Very strong). The shock occurred in a complex setting along the San Andreas Fault Zone where it bisects San Gorgonio Mountain and San Jacinto Peak at the San Gorgonio Pass and was the first in a series of three earthquakes that affected southern California and the northern Owens Valley in July 1986. Between 29 and 40 people were injured, and financial losses were estimated to be in the range of $4.5 to 6 million.

Preface

July 1986 was an unusually active month for moderate to strong earthquakes in California, with three events occurring in less than two weeks. Each had mild to moderate effects and began on July 8 with the event near Palm Springs. The second event was a M5.8 shock that occurred off the coast of Oceanside on July 13. While the earthquake off the southern California coast occurred in an area thought to be capable of generating a tsunami, the earthquake near Palm Springs occurred on a portion of the southern San Andreas Fault system that has been designated a seismic gap and is a likely location for a very large future earthquake. The Chalfant Valley earthquake occurred on July 21 along the White Mountains Fault Zone near Bishop.^[5]

Tectonic setting

The San Andreas Fault (SAF) spans nearly the length of California, where much of its length the fault is clearly identifiable, especially from San Francisco to near Cajon Pass. There, the fault splays into several branches. Several unusual characteristics are displayed further to the southeast in the area of the San Gorgonio Pass. There are no lateral stream offsets (that are associated with strike-slip faulting) near the pass like there are along other segments (one researcher indicated that thrust faulting was the dominant type of fault displacement at the pass). There are no great earthquakes that are known to have occurred at the pass, where the main trace of the SAF is marked by numerous sag ponds and north-facing scarps. The Banning Fault lies about two miles to the south of these features.^[6]

Earthquake

USGS ShakeMap for the event

Early research indicated that the Banning Fault comprises three segments and that the nearly-parallel Garnet Hill Fault lies just to the south. The epicenter of the July 8 earthquake was located in this convoluted area of faults between two segments of the Banning Fault and the Mission Creek strand of the San Andreas Fault, about 16 miles (25 km) northwest of where these two faults converge to form the Coachella Valley segment of the SAF. The focal mechanism (as defined by first motions) showed pure right-lateral strike-slip on a fault trending west-northwest that dipped to the north at 45°. As many of the aftershocks and previous events in the area showed oblique-reverse motion, researchers did not exclude the possibility that the rupture started as horizontal motion, then transitioned into movement that included some vertical motion.^[7]

Damage

In North Palm Springs, four homes and sixteen businesses were destroyed, and an additional 100 mobile homes and 100 businesses were damaged. In Whitewater Canyon, chimneys fell and three homes were destroyed, and ceramic columns were broken and a transformer was displaced at the Devers electrical substation. The Windy Point Bridge was displaced on the I-10 northwest of Palm Springs and was considered major damage.^[3]

Other temporary roadway closures included State Route 111, which was closed until the following evening, and State Route 74 and State Route 243 that were reopened later in the day. State Route 62, which crosses the Banning and Mission Creek Faults, was not immediately reopened due to buckled pavement. The California Aqueduct was damaged at several locations and water had to be diverted into a lake bed, and up to 80,000 people lost power for a portion of the day. Two fires in Riverside County caused serious damage, including a glass company that sustained $45,000 in damage, and several other brush fires.^[8]

Strong motion

The shock was captured by strong motion stations that were operated by the United States Geological Survey, the California Division of Mines and Geology and a private company. Altogether, the networks comprised about seventy-five stations, mainly including ground response stations, but also included seventeen buildings, nine dams, a power plant, and a freeway interchange. The stations were triggered at distances of up to 110 miles (180 km), with a strong motion duration of greater than three seconds at five of the closest stations. The strongest acceleration (.778g) occurred at the North Palm Springs Post Office on the vertical axis.^[4]

References

External links

• North Palm Springs Earthquake – Southern California Earthquake Data Center
• Historic Earthquakes: North Palm Springs, California – United States Geological Survey
• M6.2 - Southern California – United States Geological Survey